[MoAccess] Motif XS Tools Hotkeys
- From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Mon, 17 Sep 2007 16:58:05 -0400
Here are some notes about hotkeys that can be used in the XS editors:
control+tab = Switch between pages.
alt+number = jump directly to a page (for example, alt+1, alt+2, etc).
control+1-4 = Switch to parts 1 through 4 of a performance.
control+1-8 = switch to element 1 through 8 of a voice, or zone 1
through 8 of a master.
control+1-0 = switch to part 1 through 10 of a mix.
control+shift+1-6 = switch to parts 11 through 16 of a mix.
Control+MotifKey = set the upper key range (when on a range control).
Control+shift+MotifKey = set the lower key range (when on a range
control).
Additionally, an important key to know about is F5 (on the computer, not
on the Motif). When you press F5, the editor will refresh, and will
reflect the current settings in the Motif. So, if you're using the
editor, but want to make an adjustment by using the Motif's controls,
don't forget to press F5 when you return to the computer keyboard.
Many of the editors use layered pages. You can switch between primary
pages with control+tab, and secoondary pages with alt+number. The
Performance editor is one of the editors that works this way. With other
editors, like the Master editor, there is only one layer of tabs. In
this case, you can step through the tab pages with control+tab, or jump
directly to one of the pages with alt+number. In either case, the
scripts will announce both the primary and secondary page selection,
when you change pages.
Bryan
Other related posts:
- » [MoAccess] Motif XS Tools Hotkeys
