o wow, thanks for the reply. i think, i need to take some time to get use to the signal flow. many thanks again for the reply. i will have to really play with it. Chee Chau. --- On Wed, 4/15/09, auriuxxas <papeckiukas@xxxxxxxxx> wrote: > From: auriuxxas <papeckiukas@xxxxxxxxx> > Subject: Re: [MoAccess] sonar and audio track asignment on motif xs. > To: MoAccess@xxxxxxxxxxxxx > Date: Wednesday, April 15, 2009, 3:53 PM > Hi, > First of all, you must understand audio signal flow between > your computer/motif/your computer. Sea table below: > mLAN Audio Channels of the MOTIF XS and the computer > > When connecting the MOTIF XS to a computer via an IEEE1394 > cable, set the audio channel of the computer referring to > the table below. > > (Table) > > Input Channel of the MOTIF XS Output Channel of the > computer > > mLAN IN Main Out Monitor L, R 1, 2 > > mLAN IN L, R 3, 4 > > mLAN IN Assignable Out Monitor L, R 5, 6 > > Output Channel of the MOTIF XS Input Channel of > > the computer > > mLAN OUT L, R (L&R)* 1, 2 > > mLAN OUT 1 - 14 (m1 - m14)* 3 - 16 > > (Table End) > > You can find the same table in manual. > > You must understand, that input of your computer is output > of your motif. > > If you use mellas editor, each instrument (part) you choose > goes thrue output l and r. You can send each instrument > (part) where you want. Nearly channels of midi instrumments > (parts) in the mix editor of melas, you will find combobox, > and you can asign that instrument (part) to as l and r or to > your wanted mlan ports and record that parts in to audio. > Just don't forget folowing things: > > if you asign an instrument to another port and want to > record as audio data, you can use only insertion effects > but you loos system effects (reverb and chorus); > > if you asign an instrument to any of mlan ports, you hear > any sound (so use mlan setting "direct) in the mix > editor go view>system, there you find that mlan setting > "direct". > > Don't be afraid to experiment:) > > Hope it helps. > > ----- Original Message ----- > From: "lui chee chau" > <lcheechau@xxxxxxxxx> > To: <MoAccess@xxxxxxxxxxxxx> > Sent: 2009 m. balandžio 15 d. 01:32 > Subject: Re: [MoAccess] sonar and audio track asignment on > motif xs. > > > > hi, many thanks. that surely does help me a lot. smile. > but i do have more questions. if i understand correctly, > with the firewire port i can record a few audio track at > once to sonar. meaning i can record data from a few midi > chanel to audio saparetly at the same time. how will the > chanel asignment will be like for this situation? > cccccchee chau. > > > > --- On Tue, 4/14/09, auriuxxas > <papeckiukas@xxxxxxxxx> wrote: > > > From: auriuxxas <papeckiukas@xxxxxxxxx> > > Subject: Re: [MoAccess] sonar and audio track > asignment on motif xs. > > To: MoAccess@xxxxxxxxxxxxx > > Date: Tuesday, April 14, 2009, 7:31 PM > > Hello, > > If you want to export audio tracks from your motif > you > > must record that tracks as audio tracks with sonar. > It > > means, you have to arm an audio track in sonar and > than > > record your project in to one audio track in sonar. > > Example: i have project witch contains 8 midi tracks > and > > want to export all midi tracks in to audio. In order > to do > > this i take folowing steps in sonar: > > i insert audio track; > > go to audio track properties and select input and > output > > (input mlan1and2 and output master) > > press enter > > arm the audio track; > > point at the beginning of the project; > > press r (starts record); > > after recording, select an audio track with audio > data > > go file>export>audio; > > choose place where to save your file; > > your done:) > > Pay atention, that the first mlan pair is responsyble > for > > main mix and the second (Mlan3and4) is responsyble > for > > submix. All audio data go throu mlan pair 1and2 and > submix > > throu 3and 4. > > If you do not want export all project, you should solo > that > > midi tracks and record them as audio data or record > your > > soloed tracks throu mlan 3 and 4. > > More about signal flow between your computer and mlan > you > > can find in the section " > > Using a Computer" of motif xs manual. > > > > Hope it helps. > > > > > > > > ----- Original Message ----- > > From: "lui chee chau" > > <lcheechau@xxxxxxxxx> > > To: <MoAccess@xxxxxxxxxxxxx> > > Sent: 2009 m. balandzio 14 d. 09:46 > > Subject: [MoAccess] sonar and audio track asignment > on > > motif xs. > > > > > > > hi, finally i have manage to figure out how to > make > > the yamaha driver work with sonar. how ever, i have a > few > > questions. now that i can see all the sterio out from > my > > motif xs on the firewire port, how do i asign track > one of > > my midi track to be out put to the first sterio pare > of the > > motif? in another words, lets say i have 4 midi track > that > > i wanted to eksport to audio at once, how do i > ditermind, > > witch pare of sterio out put will contain what midi > chanel? > > many thanks again for any once help. > > > > > > chee Chau. > > > > > > > > > > > > > > > For links to all Motif info for blind owners, > visit > > www.MoAccess.info. > > > To change your list options and view archives for > the > > MoAccess list, visit > > > www.freelists.org/list/moaccess.ŠåŠy,¶†¥â€�Ê-‰ø§~‡è¹b�Ú0�êì¾+"·02€që,Å wèN‡!jxÊ‹«–+-¢›b¢{�Ûâ{«r¯zÇè®Ø^2€që,–+-¾+"·0~·ž–+-²Šà þX¬·ù¨iDz > > > > > For links to all Motif info for blind owners, visit > www.MoAccess.info. > To change your list options and view archives for the > MoAccess list, visit > www.freelists.org/list/moaccess.ŠåŠy,¶†¥”Ê-‰ø§~‡è¹b�Ú0�êì¾+"·02€që,ŠwèN‡!jxÊ‹«–+-¢›b¢{�Ûâ{«r¯zÇè®Ø^2€që,–+-¾+"·0~·ž–+-²ŠàþX¬·ù¨iDz For links to all Motif info for blind owners, visit www.MoAccess.info. To change your list options and view archives for the MoAccess list, visit www.freelists.org/list/moaccess.