[mira_talk] Re: multiple processors
- From: Lionel Guy <guy.lionel@xxxxxxxxx>
- To: mira_talk@xxxxxxxxxxxxx
- Date: Tue, 1 Dec 2009 12:47:28 +0100
Hi Brian,
Yep, I guess -GE:not sets -SK:not...
Lionel
On 1 Dec 2009, at 12:44 , Brian Forde wrote:
Hi Lionel,
Thats what I have been using but with -GE:nop
thanks
Brian
On Tue, Dec 1, 2009 at 11:38 AM, Lionel Guy <guy.lionel@xxxxxxxxx>
wrote:
Hi Brian,
AFAIK, MIRA uses multiple threads only for the skimming part (all
against all comparison). You choose the number of threads to use at
run time using -SK:not=<integer>
From the manual (http://mira-assembler.sourceforge.net/docs/
mira.html):
The parameters for SKIM3:
number_of_threads(not)=integer >= 1 Number of threads used in SKIM,
default is 2. A few parts of SKIM are non-threaded, so the speedup
is not exactly linear, but it should be very close. E.g., with 2
processors I get a speedup of 170%.
Although the main data structures are shared between the threads,
there's some additional memory needed for each thread.
HTH,
Lionel
On 1 Dec 2009, at 12:09 , Brian Forde wrote:
Hi
You say mira supports multiple processors. Is there a flag when
running mira to do this or is it specified during installation
regards
Brian
--
You have received this mail because you are subscribed to the
mira_talk mailing list. For information on how to subscribe or
unsubscribe, please visit http://www.chevreux.org/mira_mailinglists.html
--
You have received this mail because you are subscribed to the mira_talk mailing
list. For information on how to subscribe or unsubscribe, please visit
http://www.chevreux.org/mira_mailinglists.html
Other related posts:
