Hi Ashhar et al.
I had 10 PCB's made see http://www.magma.ca/~andrewr/
I made these for my own use. Two other friends I gave boards and are building.
I have my receiver working in RX. Thank you for a great design.
I have 5 blank boards left. I would like to send you and anyone else that wants
one for the cost of postage.
The boards are not perfect there are a few cuts and jumpers required. (see
construction doc a work in progress). If we have more builders can get
any remaining issues fixed. My BOM uses Digikey part numbers but can get
manfacturers numbuers from that.
Is Surface mount but can be easily hand assembled.
There is a construction manual on my web site that can be downloaded.
I also have a board designed for digital card I also have 5 of these left.
If the design is viable I can clean up the minor errors and have another batch
of boards made available at cost.
I had the boards made in China at reasonable cost.
Let me know what you think.
Andrew.
--
This message is virus free, protected by Primus - Canada's
largest alternative telecommunications provider.
http://www.primus.ca
On Sat 30/01/16 1:11 PM , Ashhar Farhan farhanbox@xxxxxxxxx sent:
guys, here is the pinch, the mixer leakage is too much to meet the
spectral requirements of FCC. if we can get the local oscillator down
to -50dbc then we have a game. - f
On Sat, Jan 30, 2016 at 11:17 PM, Vape Sailor wrote:
Still whaiting too.
Whe could make a group buy for boards (if avaiable) and parts like a
kit.
Pedro Almeida
CT5JZX
NRA: PN063
http://ct5jzx.nra.pt/ [2]
http://www.qrz.com/db/CT5JZX [3] Em 30/01/2016 17:34, "Baruch
Zilbershatz" escreveu:
i am waiting toolike to play....
On Sat, Jan 30, 2016 at 6:19 PM, takis perreas [5]> wrote:
Hi ganque!Same here like Paul. I am waiting for a PCB to surface.I
had even sent Sandeep a contribution to purchase a batch of 3 by 3
PCBoards of the earlier version but never received the Main Board. I
can homebrew Minima, Manhattan style, but I do like the neatness of
a PCB.Well, any news?!Takissv3auw/m0lpt
-------------------------
Date: Sat, 30 Jan 2016 08:42:16 -0500
Subject: [minima] Re: Minima PCB
From: paul.chebi@xxxxxxx [6]
To: minima@xxxxxxxxxxxxx [7]
Andrew: what's the latest on the Minima's PCB board. How Can
I get one along with BOM of parts ?
Thanks
Paul kk4ptv On Jul 15, 2015 9:27 AM, andrew wrote:
This is a new pcb that has just been created by VE3ZMH so a couple
of guys here in Canada who are interested in the minima can try it
out. Is surface mount.
Andrew
On 15-07-15 02:57 AM, gurudatta panda wrote:
Hi All,
I was away for a while and unaware about the latest development.
Can somebody put some light on which design the PCB is being talked
about? Is the design and testing is completed for minima now?
VU3GDP
On Mon, Jul 13, 2015 at 11:29 PM, andrew wrote:
A couple of the local Hams got together here and decided to have a
go at this radio. So we are sharing the costs and the experience. Got
to check out the board to make sure I have not made any big mistakes.
I am also working on the digital board to go with this. I am also
writing a construction manual and it has the parts list as all
Digikey parts. Is a mix of surface mount and through hole but the
surface mount are all larger parts so can be hand assembled.
Surface mount parts very inexpensive.
(1206 size typ) Going to be posting progress on the web page,
suggest you wait till we fire up the first boards and get the bugs
out.
If it all works and there is interest will likely make boards
available at nominal cost to other Hams.
Keep checking the web page.
Andrew
On 15-07-13 12:57 PM, Paul Chebi wrote:
I would be interested in buying one of these boards if when
available as well as receiving any progress reports on the building
of the Minima. BOM, etc.
Thanks for sharing
Paul Chebi
Sent from my iPhone
On Jul 13, 2015, at 11:57 AM, andrew wrote:
This is my first post. I have created my own PCB for the minima. It
mostly uses surface mount. Going to start assembling it this week.
Will document progress on web page magma.ca/~andrewr [11].
VE3ZMH
--
THANKS & REGARDS
GURUDATTA PANDA JR. SITE ENGINEER R.V.N.L. / KDJR
MOB : +91 9777447844 [12] (WORK) +91 9778238593 [13]
(HOME)
--
4Z4 RB
Baruch Zilbershatz
Ha-Shibolim 18
Nitzanay-Oz 42836
Israel
Links:
------
[1]
http://webmail.primus.ca/javascript:top.opencompose(\'pedrocalixto80@gmail.
com\',\'\',\'\',\'\')[2] http://ct5jzx.nra.pt/
[3] http://www.qrz.com/db/CT5JZX
[4]
http://webmail.primus.ca/javascript:top.opencompose(\'4z4rb11@xxxxxxxxx\',\
'\',\'\',\'\')[5]
http://webmail.primus.ca/javascript:top.opencompose(\'sv3auw@xxxxxxxxxxxxx\
',\'\',\'\',\'\')[6]
http://webmail.primus.ca/javascript:top.opencompose(\'paul.chebi@xxxxxxx\',
\'\',\'\',\'\')[7]
http://webmail.primus.ca/javascript:top.opencompose(\'minima@xxxxxxxxxxxxx\
',\'\',\'\',\'\')[8]
http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\',\'
\',\'\',\'\')[9]
http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\',\'
\',\'\',\'\')[10]
http://webmail.primus.ca/javascript:top.opencompose(\'andrewr@xxxxxxxx\',\'
\',\'\',\'\')[11] http://magma.ca/~andrewr
[12] http://webmail.primus.ca/TEL:%2B91%209777447844
[13] http://webmail.primus.ca/TEL:%2B91%209778238593
