Hi all, some more questions regarding audio highjack pro, if you don't mind, especially for those who have the latest version with the check boxes in place of the tab controls that were there originally, and this is, first, do you have to press the new session button every time you launch audio highjack pro, because according to the person who was initially helping me out, you don't, and the reason why I ask is because, I can record something, and right now, I can only record something under ten minutes, because I want to be sure all my questions are answered, and I'm happy before purchasing something I may have doubts about later on. As I say, I can record something the first time, and it acts like total recorder does, and stops at the end of audio, but then, when I re-launch it again a second time, and try to record something, then, I have silence, either at the beginning of a track, or at the end of a track, and wonder if pressing the new session button will get rid of this, and thanks in advance for any help, but the last thing I recorded, had 20 seconds of silence at the beginning of a very short track I had recorded from youtube, where the audio started right away, and I had to use total recorder to record the mp3 over again, and then, the track behaved as it should have. This, even with the pop up button on nothing, in the part of the highjack dialog that says, fill gaps with, and the pop up button has a choice of nothing, silence, light noise, or heavy noise. Marty > > Click on the link below to go to our homepage. > http://www.icanworkthisthing.com > > Manage your subscription by using the web interface on the link below. > //www.freelists.org/list/macvoiceover > > Users can subscribe to this list by sending email to > macvoiceover-request@xxxxxxxxxxxxx > with 'subscribe' in the Subject field OR by logging into the Web > interface at //www.freelists.org/list/macvoiceover >