[macvoiceover] Re: Cycling regions in Garage Band

  • From: Kelvin Falconer <tusciafalconer@xxxxxxxxxxxx>
  • To: macvoiceover@xxxxxxxxxxxxx
  • Date: Sun, 24 Jan 2021 19:34:00 +1300

and you find your playing improves dramatically !

K.

I float through Time and Space like a treeless leaf.

On 24/01/2021, at 7:29 PM, Ian Edwards <ianedwards42@xxxxxxxxx> wrote:

Cool, thanks.

Only issue now is the recording. Sound is clear, practicing and recording in 
cycles is all good, the issue is now that I can hear my recordings I can tell 
how much practice I’m not doing. That metronome is a harsh master, and unlike 
a live setting where I can drop out and count myself back in without too many 
people noticing, that recording catches everything.

Ian


On Jan 23, 2021, at 8:20 PM, Kelvin Falconer <tusciafalconer@xxxxxxxxxxxx> 
wrote:

set the cycle region in the track time ruler, cycle needs to be on using key 
c to turn on or off. in the cycle region interact with the left and right 
locators to set the bars you want to cycle, it should tell you how many are 
selected, you can do this while playing to confirm you have what you want, 
you should not hear any extra bars. holding down shifg will give you smaller 
increments.
under the record menu you can select how many bars you want as a count in.
i suggest recording a few takes with your bass then check the track contents 
that the takes have been recorded in the take folder for that track.
it will be useful to turn the metronome on while you get used to this so you 
are sure you are only hearing the number of bars you want to cycle.

K.

I float through Time and Space like a treeless leaf.

On 24/01/2021, at 3:58 PM, Ian Edwards <ianedwards42@xxxxxxxxx> wrote:

Thanks, playing around with it. First step is to figure out how to adjust 
the cycle region. I selected a region and hit cycle, when I played it it 
nicely repeated itself so I could practice, but it gave me an extra 
measure. It gave me my two measures that the region consisted of, but then 
the cycle gave me measure 3 before going back to measure 1. Is this normal?

Ian


On Jan 22, 2021, at 11:16 PM, Kelvin Falconer 
<tusciafalconer@xxxxxxxxxxxx> wrote:

yes, though logic is clearer than gb regarding this.
in gb preferences under general select to create take s with each pass 
rather than merge. you have options for this when cycle is on or off and 
refers to software instruments, it should show similar for audio 
instruments.
each cycle should create a new take then in the track contents under each 
track you are presented with a take folder from which you can select which 
take to hear and you can delete those you don't want.
gb gives far less options 
see what happens

K.

I float through Time and Space like a treeless leaf.

On 23/01/2021, at 5:44 PM, Ian Edwards <ianedwards42@xxxxxxxxx> wrote:

Ok, Garage Band Gurus, I could use some help figuring out cycling regions.

I kind of understand that cycling a region makes it repeat, how does this 
effect recording? If I have an 8 measure drum region and I want to repeat 
it while I record my bass part, if I cycle the region can I play the part 
over and over again until I get it the way I like it?

Ian


Click on the link below to go to our homepage.
http://www.icanworkthisthing.com

Manage your subscription by using the web interface on the link below.
//www.freelists.org/list/macvoiceover

Users can subscribe to this list by sending email to
macvoiceover-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field OR by logging into the Web
interface at //www.freelists.org/list/macvoiceover



Click on the link below to go to our homepage.
http://www.icanworkthisthing.com

Manage your subscription by using the web interface on the link below.
//www.freelists.org/list/macvoiceover

Users can subscribe to this list by sending email to
macvoiceover-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field OR by logging into the Web
interface at //www.freelists.org/list/macvoiceover



Click on the link below to go to our homepage.
http://www.icanworkthisthing.com

Manage your subscription by using the web interface on the link below.
//www.freelists.org/list/macvoiceover

Users can subscribe to this list by sending email to
macvoiceover-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field OR by logging into the Web
interface at //www.freelists.org/list/macvoiceover



Click on the link below to go to our homepage.
http://www.icanworkthisthing.com

Manage your subscription by using the web interface on the link below.
//www.freelists.org/list/macvoiceover

Users can subscribe to this list by sending email to
macvoiceover-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field OR by logging into the Web
interface at //www.freelists.org/list/macvoiceover



Click on the link below to go to our homepage.
http://www.icanworkthisthing.com

Manage your subscription by using the web interface on the link below.
//www.freelists.org/list/macvoiceover

Users can subscribe to this list by sending email to
macvoiceover-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field OR by logging into the Web
interface at //www.freelists.org/list/macvoiceover



Click on the link below to go to our homepage.
http://www.icanworkthisthing.com

Manage your subscription by using the web interface on the link below.
//www.freelists.org/list/macvoiceover

Users can subscribe to this list by sending email to
 macvoiceover-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field OR by logging into the Web
interface at //www.freelists.org/list/macvoiceover

Other related posts: