[Linuxtrent] asus a7v e linux
- From: "Francesco Giardini" <fgiardini@xxxxxxxxxxx>
- To: linuxtrent@xxxxxxxxxxxxxxxxx
- Date: Fri, 17 May 2002 09:55:15 +0200
Ho provato a installare la RedHat 7.3 che in teoria non dovrebbe dare problemi.
Invece non parte nemmeno l'installazione, il tutto si blocca mentre sta andando
il controllo dell'hardware... riporto qui di seguito quello che posso leggere
sul video... fino al punto in cui si blocca tutto. Cosa posso fare???
...
vesafb: framebuffer at 0x8000000, mapped to 0xd080d000, size 32678k
vesafb: mode is 1024x768z8, line lenght=1024, pages=41
vesafb: protected mode interface info at c000:4606
vesafb: scrolling: redrow
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001 - 07 - 08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
tty s00 at 0x03f8 (irq=4) is a 16550a
tty s01 at 0x02f8 (irq=3) is a 16550a
block: 480 clots per queue, batch=120
Uniform Multi-Platform E-IDE driver revision: 6.31
ide: assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on PCI 00:04.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
PDC20265: not 100% native mode: will probe irqs later
PDC10265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode
ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:pio, hdh:pio
hda: IRQ probe failed (0xfffffff8)
hda: IRQ probe failed (0xfffffff8)
hda: no response (status=0x0a), resetting drive
hda: IRQ probe failed (0xfffffff8)
hda: no response (status=0x0a), resetting drive
hdb: IRQ probe failed (0xfffffff8)
hdb: IRQ probe failed (0xfffffff8)
hdb: no response (status=0x0a), resetting drive
hdb: IRQ probe failed (0xfffffff8)
hdb: no response (status=0x0a), resetting drive
hdc: WAITEC CD-R WT3284, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 011, ATAPI CD/DVD-ROM drive
hde: QUANTUM FIREBALLP LM30, ATA DISK drive
ide1 at 0x170-0x177, 0x376 on irq 15
ide2 at 0x8800-0x8807, 0x8402 on irq 10
blk= queue c02c2ecc, I/O limit 4095Mb (mask 0xffffffff)
A questo punto si blocca e non mi resta che premere il bottone di riavvio
hardware. :(((
--
Per iscriversi (o disiscriversi), basta spedire un messaggio con SOGGETTO
"subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxxxxxx
Other related posts:
