> -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Penso di non essere stato chiaro, ma ero in un momento di frustrazione... > Allora rpartiamo: > > Originariamente sul pc avevo installato solo una scheda di rete impostata > come ip 192.168.0.1 netmask 255.255.255.0. Il file /etc/network/interface > dice questo a riguardo della mia eth0: > > auto eth0 > iface eth0 inet static > address 192.168.0.2 > netmask 255.255.255.0 > network 192.168.0.0 > broadcast 192.168.0.255 > # gateway 192.168.0.1 > > Successivamente ho aggiunto l'altra scheda di rete... all'avvio dando > ifconfig > non la presentava quindi ho dato ifconfig eth1 10.0.0.1 netmask > 255.255.255.0 > > ridato ifconfig vedo elencate entrambe le schede di rete. Penso sia tutto > a > posto, ma se provo a dare: > > ping 192.168.0.2 > > o > > ping 10.0.0.138 > > (ovviamente entrambi gli host erano funzionanti), > non succede assolutamente nulla... rimane li fermo... > > Come faccio a fare in modo che le due reti funzionino separatamente? > Il passo successivo sarà quello di abilitare NAT... anche qui > suggerimenti? > > Grazie e spero di essere stato più chiaro. Prima di tutto abilita il forwarding in /etc/network/options. Diaolin > > > - -- > Nivox > > Linux Registered User #290686 > Powered by: Debian Sid > JABBER: nivox@xxxxxxxxxxxxxxx > GPG Key ID: 0xC6A50D8D (info: www.gnupg.org) > GPG Keyserver: http://www.keyserver.net > > La donna è un errata implementazione di un architettura corretta (Diaolin) > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.3 (GNU/Linux) > > iD8DBQE/0c1mfhOftsalDY0RAp3bAJ442YK5w86jaXt2hsRc67U7QnK0lgCgnlIf > 6BVgYdJ8TAn6+rxY1M2qCnE=oL1/ > -----END PGP SIGNATURE----- > > -- > Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO > "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx > > > -- Per iscriversi (o disiscriversi), basta spedire un messaggio con OGGETTO "subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx