[LRflex] Re: Pelican cases, etc..
- From: "Fred Hess" <fredhess@xxxxxxxxxxxxxxxxx>
- To: <leicareflex@xxxxxxxxxxxxx>
- Date: Sat, 5 Dec 2009 22:00:56 +0100
Hello Dave,
I use several seperate cases for cameras and lenses. I use divider-kitsof
Pro-Cam to separate the items in a case. I also made some special waterproof
lenscases of PVC tubes f.i. for my Apo-Elmarit-1:2.8/280mm and myTelyts
1:6.8/400 and 560mm.
Fred
----- Original Message -----
From: David Simms
To: leicareflex@xxxxxxxxxxxxx
Sent: zaterdag 5 december 2009 21:44
Subject: [LRflex] Re: Pelican cases, etc..
Thanks Fred;
Do you package your entire "kit" in a Pelican or do you break up the pieces
into different "packages" ? I'm wondering about the clearances, primarily. I'll
probably package either a camerawith one lens in a Pelican and any additional
lenses in tubes made with PVC.
Dave
------------------------------------------------------------------------------
From: Fred Hess <fredhess@xxxxxxxxxxxxxxxxx>
To: leicareflex@xxxxxxxxxxxxx
Sent: Sat, December 5, 2009 12:39:53 PM
Subject: [LRflex] Re: Pelican cases, etc..
Hello Dave,
I use Pelican cases for many years for my Leica (M & R ) equipment, and for
video- and audiogear as well. I am very content with these cases, I use them
mostly on hikings in extreme country and on canoetrips. I also use
Rimowa-cases, Temba-bags and LowePro-rucksacks. But when I have depent on
protection and waterproof I use the Pelicancases. I also have a special
Pelican-case for my laptop!
And they (at least in The Netherlands) provide very good after-sales-services.
Regards from The Hague
Fred
----- Original Message -----
From: David Simms
To: leicareflex@xxxxxxxxxxxxx
Sent: zaterdag 5 december 2009 19:17
Subject: [LRflex] Pelican cases, etc..
Hello fellow Leicaphiles;
I wonder whether I could get a bit of help with comments re. protective
gear for equipment.
I take cameras and lenses to places where it's possible to bang them around
a bit too much; skiing, climbing and hiking. This week, for example, I've been
out every day taking pictures of ice growth on some of our local waterfalls.
I'm very attentive to protecting camera gear but I don't yet have a foolproof
system.
Last year, I bumped the rewind knob on my M4-2 and had to have it repaired.
Luckily, it was long overdue for attention and it several other issues dealt
with at the time. Nevertheless, I don't want to make equipment damage a regular
thing.
Since I often carry gear in a pack (I used to use a Lowe Pro fanny pack and
I often stuffed it, with its contents, into a regular pack) and, I've settled
on a solution for lenses. I'll use short pieces of PVC pipe, cut to the right
length and lined with closed cell foam or felt or some other shock absorbing
material. With the end caps placed on the pipe, this should be fine for lenses.
For a camera body, I'll use a Pelican case. However, with reference to these,
I'm not quite sure how much extra space to allow, in the thickness, to insure
good shock absorbtion. Unless one examines these in person it's tough to come
up with the right guidelines.
So, if the height of an M is 8cm and the measurement from the back to the
end of the lens is roughly the same, how much extra space should I allow for
padding, in a Pelican (or similar case) ? If I look for a model that gives the
interior thickness dimension as 10 cm, 12 cm etc. ? Would that be sufficient ?
Is anyone, out there, using Pelican cases ?
Thanks for your help.
Dave, Clearwater, BC, Canada
----------------------------------------------------------------------------
Looking for the perfect gift? Give the gift of Flickr!
------------------------------------------------------------------------------
Be smarter than spam. See how smart SpamGuard is at giving junk email the
boot with the All-new Yahoo! Mail
Other related posts:
