[karc] Re: Kit build
- From: "kenneth pugh" <ve3xct@xxxxxxxxx>
- To: <karc@xxxxxxxxxxxxx>
- Date: Sun, 16 May 2010 13:53:05 -0400
Hi Rob;
Feels good to be with the group and be able to build a radio ,brings back
memories
when we had classes in the tec-.part of a radio ...I appreciate your time
and effort,,, hope to have my board complete for next time. Good job.
Have company the 22nd,,,29th fine with me..
ve3xct 73s Ken.
PS Good job.
----- Original Message -----
From: Valveman
To: karc@xxxxxxxxxxxxx
Sent: Sunday, May 16, 2010 12:04 PM
Subject: [karc] Re: Kit build
Hi Bill;
I'm happy you are enjoying the build.
As for next week end, it is possible to postpone our get together for the
week after but only if the consensus wishes to do that.
What is the consensus of the builders?
A. Continue next Saturday with the build?
B. Postpone for a week due to the long week end?
Robert Parker
VE3RPF
------------------------------------------------------------------------------
From: William Mason <ve3nfubill@xxxxxxxxx>
To: karc@xxxxxxxxxxxxx
Sent: Sat, May 15, 2010 11:37:56 PM
Subject: [karc] Re: Kit build
Rob
Thanks for the help enjoyed the get together
and having fun soldering at home
Got new tip for my soldering iron so that is working well. Wonder if next
weekend being holiday weekend will keep anyone away re Victoria day on
Monday
I am going nowhere so should be able to attend on Sat
Bill VE3NFU
On Sat, May 15, 2010 at 12:47 PM, Valveman <valveman_6146@xxxxxxxxx>
wrote:
Today was the first session of the KARC kit build.
Everyone is well on their way with building their kit.
There was a little slip-up by me with the soldering of the SMD device.
I had put the chip on backwards for a few members but was able to
correct this in all but one board.
I will orientate Dave's board next week during the second and last build
session. Dave I thought you were going to leave me your board so
I imagine you are going to keep working on your board this week.
I will bring my hot air tool to remove and re-orient the SMD on your
board.
We should be able to test the boards next week so continue populating
the boards this week.
If you have any questions with the build, email me on this list so
everyone can read your post.
In this way, the same question does not have to be answered several
times.
I was happy to see everyone was enjoying themselves. It was really
interesting when the small SMD chip decided to take a little trip :O)
Colourful expletives were used a bit to express my appreciation hihi.
I look forward to seeing you next week where we will test the
transceivers.
Robert Parker
Other related posts:
