Ah yes, you were the unwilling victim for that painful process.. ;) Luckily my external drive backed up all that work so when I got this new machine I just copied it all back, without really looking through it all. There are other repaints too in various stages of work and I’ll sift through that lot in time. Even with FSX running I know this would still have been a painfully slow process so MCX has proved invaluable. I note that it has far more powerful functions than just displaying repaints so I must look at the manual to see what else it can do. I am running FSX Deluxe Edition as installed straight from the DVD. I still have to check to see what updates and tweaks are needed to make it work better. It says it is fsx-sp2 (10.0.61472) so I hope that is reasonably up to date. John fossil@xxxxxxx From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Reynolds Sent: 21 August 2013 22:35 To: jhb@xxxxxxxxxxxxx Subject: [jhb] Re: [jhb] Re: Repaints Hi Bones, I remember working with you on these repaints a few years back. You didn't have fsx installed, so you'd do some checkered textures and I'd load them into fsx and send you screenshots. Then you'd tweak things and resend for more screenshots. If I recall, they took a while! ModelConverterX makes it all so much easier. Phil Sent from my HTC ----- Reply message ----- From: "John Woodside" <fossil@xxxxxxx> To: <jhb@xxxxxxxxxxxxx> Subject: [jhb] Re: Repaints Date: Wed, Aug 21, 2013 16:43 OK Peter. In the meantime I have uploaded repaints of the FSX Cessna 208 and the Bombardier CRJ700. As with the A321 the texture sets are basic so I can’t put registrations on the wings. The differing scales of objects like doors also make the stripes almost impossible to line up but I have blended these with shading to reduce the appearance of zigzags.. I can see why I didn’t finish these two earlier. Again, without Model Conv X these would have been a nightmare to work on.. John fossil@xxxxxxx From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf Of Peter Dodds Sent: 21 August 2013 09:44 To: jhb@xxxxxxxxxxxxx Subject: [jhb] Re: Repaints I need to do a bit more work on M-JHBC. I discovered a few oddities of symmetry I need to resolve. Peter <mailto:bones@xxxxxxx> John Woodside 16 August 2013 20:04 On revisiting the repaints page I see I have been a little remiss on one matter. I have not been completely uniform in adding credits to each repaint. I have added the painter to most aircraft listed but I see gaps. If you have sent me a repaint and it is missing appropriate credit please let me know and I will correct it immediately. John Woodside bones@xxxxxxx