DennisAccording to Saitek, the fix, is to disconnect the units, go into the registry and delete the controller entries. Reconnect the units, move the levers rapidly 4 times full travel, to rebuild the registry. To my mind, dust and carbon tracks do not go together, perhaps I will get one of those air blasters from the local electronics shack, and give it a blast. Email from Saitek, all products have a 2 year warranty, afraid mine ran out at least 2 months ago. Had a look at the CH 6 lever unit, currently £188.00 ouch! rather go back to using a normal joystick, eugh!
Frank----- Original Message ----- From: "Denis Ripley" <dripley@xxxxxxx>
To: <jhb@xxxxxxxxxxxxx> Sent: Wednesday, April 21, 2010 8:52 PM Subject: [jhb] Re: Quadrants
If you suspect dust Frank, have you tried running the slider from max to minto max in rapid succession a number of times. I know, on my headset volume control, it occasionally gets scratchy and running the aforementioned gets rid of the scratchiness. Denis----- Original Message ----- From: "Frank Fisher" <ffisher991@xxxxxxxxxxxxxx>To: <jhb@xxxxxxxxxxxxx> Sent: Wednesday, April 21, 2010 12:21 PM Subject: [jhb] Re: QuadrantsTried everything, even deleted the registry entries as per Saitekinstructions. As far as FSUIPC, I have the registered version, but baulkedat trying to set it up. Basically, moving the lever slowly and smoothly, the lever on the screen, and the power output of the aircraft is plain erratic, suddenly jumps tofull power, then back to idle, then bounces. And that is when trying to doit slow. Leaving the lever in one position, it sort of settles down, but just touch it, and it is away again. Makes it rather difficult to taxi, and get a smooth approach. Once on cruise, it is a little easier to set the levers to the required settings. I suspect the carbon tracks are knackered, as it is all to easy for dust to collect inside the unit, and you cannot get inside without surgery. It is not my machine or OS or FSX, as plugging in another joystick is no problem at all. I am waiting on Saitek to come back, but they have reorganized/outsourced their response department Frank----- Original Message ----- From: "Fossil" <fossil@xxxxxxx>To: <jhb@xxxxxxxxxxxxx> Sent: Wednesday, April 21, 2010 5:55 PM Subject: [jhb] Re: QuadrantsI presume you've tried a recalibration, both in the Windows control panel and in FSUIPC (if you still run this)? bones bones@xxxxxxx -----Original Message----- From: jhb-bounce@xxxxxxxxxxxxx [mailto:jhb-bounce@xxxxxxxxxxxxx] On Behalf Of Frank Fisher Sent: 21 April 2010 16:44 To: jhb@xxxxxxxxxxxxx Subject: [jhb] Re: Quadrants My pedals are plugged direct into the back of the machine. The yoke directinto the front or back. The main controller is plugged into the Yoke, viamini round plug, the secondary, a standard USB plug, either into the front or back, or the yoke. Would have been better if the main controller had a USB plug as well. Plugging in other joysticks, they are steady as a rock. The fact that it isonly the one lever, which is the most used, which is causing the problem.I do not think the life cycle of those carbon sliders is very high. As I recall, I had no problem with either, before reinstalling Vista a fair while ago. Only since then. Perhaps an upgrade to Win7 will do the trick, or not as the case may be. Or perhaps deleting all the Hub devices in the device manager, and let Windows recreate them would help. There is a lot of them. Frank----- Original Message ----- From: "Gerry Winskill" <gwinsk@xxxxxxx>To: <jhb@xxxxxxxxxxxxx> Sent: Wednesday, April 21, 2010 1:54 PM Subject: [jhb] Re: QuadrantsMine are both fine. I thought they were going downhill, a couple of months ago, coincident with the change to W7. Eventually I sorted them out, by a mixture of uninstall followed by reinstall, plus changing the USB Hub into which they were plugged. I think it was the last move thatcured them, so it would be worth trying this first. Best bet might be totry plugging one of them directly into a USB socket on the PC, then see how it behaves. The downside of a large number of USB connected addons seems to be unwanted interaction. Occasionally I find that changing something like an ADF frequency can also result in a change in my GF Autopilot's Altitude setting. Gerry Winskill Frank Fisher wrote:I have just fired off an email to Saitek regarding my ProFlight Throttle quadrants. The secondary quadrant, a few months back, developed a fault, namely the throttle and mixture levers were giving out an unstable output, and basically unusable. It is now in use solely for the buttons which is controlling my AC electrics, Gens/Batt/Starter etc. Now the main throttle is going the same way, unstable and bouncing outputs. These units are just over 2 years old, with reasonable use, mainly for GA and some jets, for Helios, I use a Saitek twiststick. A careful examination inside, reveals the lever controllers, areconstructed using open to the atmosphere carbon sliders, instead of themore usual, and more robust, rotary pots. Ok, so the units are smaller for that. I imagine that dust has filtered inside and on to the carbon face, and then wiped by the slider, which has gradually worn off the face, reducing electrical contact. A very poor design. I am now faced with the prospect of replacing said controllers, sooner rather than later than expected. The Yoke and Pedals are A1. Depending on Saiteks response. Replacement controllers. Saitek? Costing? Replacement controllers CH? Costing? Or dig out my soldering iron, and replace the pots with sealed rotary ones. A new housing for the larger pots will be needed of course. Anyone else with Saitek throttle controllers, beware. I got mine from Pixmania, so I am not expecting a good response from Saitek. I am not a happy bunny. Frank---------------------------------------------------------------------------- ---- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.814 / Virus Database: 271.1.1/2825 - Release Date: 04/21/10 07:31:00-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.814 / Virus Database: 271.1.1/2826 - Release Date: 04/21/10 12:09:00
-------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.comVersion: 9.0.814 / Virus Database: 271.1.1/2830 - Release Date: 04/23/10 07:31:00