Re: instructions for creating and using a Windows XP unatended floppy disk
- From: "Ray Foret Jr." <rforetjr@xxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Wed, 12 Jan 2005 13:07:24 -0600
First, you go to:
www.jfwlite.com
and click on the programs link. then, download the Windows XP unattended
kit. Save it to your Desktop. This is a .zip folder from which you must
extract the files. What you open in Notepad is a file called
Nd Want.sif. This is the special file you put your personal information in
and then use control S to save the changes and follow the rest of the
instructions. As you will gather, this is not a program which has an
installer. It's a collection of files you use to get the job done. Good
luck.
Sincerely Yours,
The Constantly BAREFOOTED
Ray
Home Phone And Fax: (985)853-0139
E-mail and Windows Messenger:
rforetjr@xxxxxxxxx
God Bless President George W Bush
God Bless America
And God Bless Our Troops
----- Original Message -----
From: "chevelle" <chevelle33@xxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Wednesday, January 12, 2005 12:57 PM
Subject: Re: instructions for creating and using a Windows XP unatended
floppy disk
Hey Jack or Teril, can you clarify some things? So do I go to
www.jfwlite.com and download this unattended install programs for windows xp
home right? Then do I install this unattended program or extract files? I am
confused at this point. I still not sure what do I open in note pad, and how
do I know what to type in note pad. Also Jack can you clarify your below
post about deleting some sort of file?
----- Original Message -----
From: "Jack Lowe" <akronjack1982@xxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Wednesday, January 12, 2005 7:19 AM
Subject: Re: instructions for creating and using a Windows XP unatended
floppy disk
>I would also like to point out that you do not need that .dat file. All
>you
> need is the .sif file.
> I deleted the winnt.dat file from the floppy. It serves no perpose. Jack
> ----- Original Message -----
> From: "Ray Foret Jr." <rforetjr@xxxxxxxxx>
> To: "JFW List" <jfw@xxxxxxxxxxxxx>
> Sent: Wednesday, January 12, 2005 5:46 AM
> Subject: instructions for creating and using a Windows XP unatended floppy
> disk
>
>
>>I would just emphasize one point before pasting these instructions. This
>> same file is located within the Floppy without sound subfolder of the
>> Windows XP unatended kit folder which is created upon extraction of the
>> files in the original .zip folder. Once you unzip the folder and click
>> on
>> the Floppy Without Sound sub folder created with the extracted files in
>> it,
>> you'll see to files located in it. These files are:
>> ND Winnt.sif and Winnt.bat. Now, here are the instructions exactly as
>> pasted from the .rtf file included in the floppy sub folder.
>>
>> This is the instructions for creating a unattended setup for xp that uses
>> a
>> floppy and an XP setup CD; this one assumes your sound card drivers are
>> already included on the windows XP CD. If your drivers are not included
>> see
>> the instructions in the CreateBootableCDWithSoundDriver.zip folder
>> instead.
>>
>>
>>
>> *Warning, this answer file is for XP only. It has to be the full install
>> CD. It will not work with an upgrade CD either; it must be the full
>> install
>> CD.
>>
>> *Warning, this will completely wipe out your C drive and repartition it.
>>
>> *Warning, if you have your hard drive partitioned off into more than one
>> partition it will delete all partitions and create one large partition.
>>
>> *Warning, remove your jaws key from your hard drive before using this
>> answer
>> file.
>>
>> *Warning, back up all your data before using this answer file because
>> your
>> C
>> drive will be completely wiped out, repartitioned and formatted.
>>
>> Instructions:
>>
>> Part 1
>>
>> 1.. Open the ND Winnt.sif file with note pad and replace all the X's
>> with
>> your personal information then press Control plus S to save the changes.
>> 2.. Now rename ND Winnt.sif to Winnt.sif.
>> 3.. You can also change your home Paige and display properties if you
>> wish
>> and add more favorites. I would recommend you leave it as is and change
>> it
>> from the control panel after windows is installed though.
>> 4.. Format a 3 1 half floppy and copy the Winnt.sif file you just
>> modified
>> and the Winnt.bat file on to the newly formatted floppy disk.
>> 5.. Part 2, how to use:
>> 1. If your bios are not already set to boot from CD you will need sighted
>> assistance to set this in your bios. It should be CD, floppy, then hard
>> drive. This will only need to be done once. Consult your computers
>> documentation for instructions because it is different on different
>> computers.
>>
>> 2. Insert your XP CD into your CD rom drive and the floppy you just
>> created
>> into your floppy drive.
>>
>> 3. Now shut down your computer completely.
>>
>> 4. Restart your computer with your XP CD and the floppy you created in
>> their perspective drives.
>>
>> 5. This is important; the XP CD puts up a screen when the computer is
>> started with it in the CD drive that says press any key to boot from the
>> CD.
>> We can't see this screen, but we know it is there so start tapping your
>> space bar repeatedly, not fast but in about one second intervals until
>> you
>> hear the CD start turning and the floppy grab. It will not hurt if you
>> do
>> this for to long, it is better to long than to short because if it does
>> not
>> boot from the CD set up will go directly to the floppy and hang there.
>> If
>> it does not take the first time, turn off your computer and start over.
>>
>> 6. Now it will start the setup and pull the information such as the CD
>> key
>> etc. off of the floppy. The XP music will start playing when it is done.
>>
>> 7. After you hear the music hit the windows key plus the letter U to
>> bring
>> up the utility manager. This will also bring up narrator. If you get
>> stuck
>> in the utility manager and cannot close it, hit alt plus F4 until it
>> closes.
>>
>> 8. Now alt tab till you get to the XP startup screen and enter your name
>> and hit next. Choose no to the screens that ask you if you want to set
>> up
>> your internet now and if you want to activate now, this can be done after
>> you install jaws. Hit finish on the last screen. Windows will now
>> restart
>> and narrator should still be on, if not hit windows key plus U again to
>> bring it up.
>>
>> 9. Remove the XP CD and the floppy then reboot and install jaws.
>>
>> Terrill Reynolds
>>
>>
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/2005
>>
>> --
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/2005
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
