Re: Graphics labeling box
- From: Brad D <bram4@xxxxxxxxxxxxx>
- To: jfw@xxxxxxxxxxxxx
- Date: Sat, 11 Dec 2004 13:24:09 -0600
Creating a Graphic Label Manually
Creating a Graphic Label Manually
To practice creating a Graphic Label, use HJPad. To launch HJPad go to
Start, Programs, JAWS510, Run HJPad.
Using the Graphic Labeler is easy, but before you start ensure that you
have speak graphics verbosity turned on. Follow these steps to be sure:
List of 3 items
1. With HJPad open, press INSERT+V to bring up the Verbosity dialog box.
2. Press G to move to the Graphics Verbosity item in the list box.
3. Press the SPACEBAR until you hear JAWS say, "All graphics," and then
press ENTER.
list end
Now that all graphics will be spoken, you are ready to find a graphic to label.
List of 1 items
4. Press the NUM PAD MINUS key to activate the JAWS cursor.
list end
Tip: To navigate to the toolbar, first press PAGE UP to move to the top of
the window, and then press HOME to move to the top, left.
List of 6 items
5. Use the arrow keys to move to the first toolbar button. You will hear,
"Graphic XXX." XXX can indicate any number.
6. Press INSERT+G to open the Graphic Labeler.
7. When the Graphic Labeler is opened, the focus is in the edit field,
where you should enter the label for the graphic. It will contain the
graphic and
the number that is assigned to it. Type the name for your graphic.
8. Press the TAB key to move to the Braille label field. Here you can enter
a label for a Braille display.
9. Next press the TAB key to move to a group of radio buttons that will let
you determine where you want to save the label, in the application file,
default
file, or both files.
10. Press ENTER to activate your graphic label.
list end
Note: To edit a graphic label, use the same procedure that you would to
create a new graphic label, and just change the name of the label in the
Graphic
Labeler when it opens. To delete a graphic label, do the same, but delete
the name in the Graphic Labeler.
Back alt+b
Next alt+x
At 02:07 PM 12/11/2004 -0500, you wrote:
>Would someone please put out full instructions on how to labile graphics' and
>how and where to save changes to. Thank you!
>
>--
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: //www.freelists.org/archives/jfw
>
>If you have any concerns about the list, post received from the list, or
>the way the list is being run, do not post them to the list. Rather
>contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
