[jawsscripts] Re: JAWS Access via Remote Desctop (RDP Protocol)

  • From: Soronel Haetir <soronel.haetir@xxxxxxxxx>
  • To: jawsscripts@xxxxxxxxxxxxx
  • Date: Fri, 7 Jun 2013 07:19:03 -0800

One of the jaws server install options (where it must be used over the
network, not available at the local login) does not require a reboot.

On 6/7/13, Thomas Wetche <thomas.wetche@xxxxxxxxx> wrote:
> Hi Mike
> Very good, thanks! Does this type of JAWS installation require the server to
>
> be rebooted?
>
>
> -----Oprindelig meddelelse-----
> From: Mike O'Brien
> Sent: Friday, June 07, 2013 4:02 PM
> To: jawsscripts@xxxxxxxxxxxxx
> Subject: [jawsscripts] Re: JAWS Access via Remote Desctop (RDP Protocol)
>
> Hi
>
> JAWS must be installed on the server to be accessed remotely by a JAWS user.
>
> But there are options to install JAWS on the server so that it can only be
> used by a JAWS user coming in remotely.  Have the administrator take a look
>
> at
> http://www.freedomscientific.com/fs_support/BulletinView.asp?QC=873
>
>
> -----Original Message-----
> From: jawsscripts-bounce@xxxxxxxxxxxxx
> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Thomas Wetche
> Sent: Friday, June 07, 2013 08:47
> To: jawsscripts@xxxxxxxxxxxxx
> Subject: [jawsscripts] Re: JAWS Access via Remote Desctop (RDP Protocol)
>
> Hi Travis
> Thanks
> And if the administrator does not allow JAWS to be installed at the server,
>
> this is simply end of discussion? Do you see any other solution?
> Regards Thomas
>
> -----Oprindelig meddelelse-----
> From: Travis Roth
> Sent: Friday, June 07, 2013 2:36 PM
> To: jawsscripts@xxxxxxxxxxxxx
> Subject: [jawsscripts] Re: JAWS Access via Remote Desctop (RDP Protocol)
>
> JAWS has to be installed on the server as well as the client.
>
>
> -----Original Message-----
> From: jawsscripts-bounce@xxxxxxxxxxxxx
> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Thomas Wetche
> Sent: Friday, June 07, 2013 7:11 AM
> To: jawsscripts@xxxxxxxxxxxxx
> Subject: [jawsscripts] JAWS Access via Remote Desctop (RDP Protocol)
>
> Dear Listers
> This might be off topic for this list, and if so could anyboddy please guide
>
> me to the wright forum for this?
> I’ve got a job, where I’m going to work at a local labtop using the RDP
>
> protocol to get access to the programs and the data at the server. The
> system administrator is not letting JAWS beeing installed at the server,
> meaning that JAWS stops speaking when connected to the server, and the
> remote desctop windows is active. The RDP protocol is normally using port
> 3393 and the server is Windows 2003 Int.
> No users are allowed to run programs that are locally installed.
> Any suggestions to configure JAWS and handle this situation please?
> You are wellcome to write me off list at thomas.wetche@xxxxxxxxx Thanks in
> advance Thomas __________�
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
>
> __________
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
> __________
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
> __________�
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
> __________�
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
>


-- 
Soronel Haetir
soronel.haetir@xxxxxxxxx
__________�

View the list's information and change your settings at 
//www.freelists.org/list/jawsscripts

Other related posts: