yep, you should be able to do that. that should work, so long as the OSM remains reliable enough in Jaws. as I say, that's not nearly as much of a given as one would like to be able to believe. and, seriously I'd only use this method though, if just doing two static spots in your window, proved unreliable or not satisfactory for some reason, due to them being moved about by other dynamically altering things in the environment. i.e. without searching for any graphics etc. since they'l be snappier in response if hsc just has to go to a spot and click, without having to search for a graphic first. but, sure, try it out, it should work too. Message ----- From: "GianniP46" <giannip46@xxxxxxxxxxxxx> To: <jawsscripts@xxxxxxxxxxxxx> Sent: Thursday, January 14, 2010 2:44 PM Subject: [jawsscripts] Re: HSC searching for a graphic > you are the man! ok, so I know that for example there two internal mode graphics. one for the left deck and one for the right deck in ScratchLive. So I can set up a hotspot for the first one as usual just to search top down for the first instance of internal mode? And the second would get the same thing, but then change the graphic count to two and then it will click the second one instead of the first one? > ----- Original Message ----- > From: Geoff Chapman > To: jawsscripts@xxxxxxxxxxxxx > Sent: Wednesday, January 13, 2010 8:52 PM > Subject: [jawsscripts] Re: HSC searching for a graphic > > yep it should be. > > first, obviously label your graphic with something halfway meaningful, even > if there > is more than one instance of it, and they may do quite different things in > each of those instances. > second, place your jaws cursor over that graphic, and press hscMods+f7. > hsc should then attempt to do a little FindGraphic test on that graphic, and > tell you if it can see it in the OSM or not, and tell you what iteration it > is. > i.e. 2 of 7 or whatever, if there are 7 instances of it in the application > window, or whatever window you've told it to search in. tip: doubleClicking > hscMods+f7, wil flip the type of window that hsc should use to search in, > from Application window, rotering through TopLevel window, then current > window. > this is more complicated than I've got time right now to go into, but you > would normatively probably use application window, although using the other > window types, might narrow things down a bit in some ways, but have other > caveats to working successfully, depending how identifiable those other > window types might be. > > so then go ahead and define your Hotspot over that graphic, using the > alt+control+shift+g, > graphics and text, wizard hotkey, and choose Search TopDown when it asks. > > then when your done, go into the definition editor and look for a line that > says, > GraphicCount=1 > > change that number to the instance of the graphic you want it to look for. > then hit enter to save the edit and ok when asked to confirm. > > Note! be warned! Jaws and offScreenModel reliability is not known for it's > robustness. so reliability may be less than you would like it to be, using > these methodologies to click at the right spot. > obviously you can label your spot then, with the job that instance of the > graphic, will do when you click it, which in fact was the whole initial > reason prompting me to desire an app like > hotSpotClicker in the first place. for those SITUATIONS where you had > multiple instances of the same graphic, doing very different things, and you > wanted a way to click on each one and label it, with it's own job at that > location. > > tip2. if you find the FindGraphic iteration feature just tooooo unreliable, > you might ditch that, and try using current Window, for the spot positioning > mode instead. and, if that currentWindow containing this graphic/spot > location, is uniquely identifiable enough with hsc, then you might have > better reliability of hsc tracking that window, than you might obtain > through the more touchy and more frontEnd, findGraphic method, which is apt > to be somewhat unreliable due to OSM concerns in my view. > > > > To: "JawsScriptsList" <JawsScripts@xxxxxxxxxxxxx> > Sent: Wednesday, January 13, 2010 10:07 AM > Subject: [jawsscripts] HSC searching for a graphic > > > > Hi, > > Is it possible to create a hotspot and have HSC search top down for the > second instance of a particular graphic? > > > > Gian Pedulla > > GianniP46@xxxxxxxxxxxxx > > > > LETS! GO! METS! > > __________ > > Visit and contribute to The JAWS Script Repository http://jawsscripts.com > > > > View the list's information and change your settings at > > //www.freelists.org/list/jawsscripts > > > > __________ > Visit and contribute to The JAWS Script Repository http://jawsscripts.com > > View the list's information and change your settings at > //www.freelists.org/list/jawsscripts > > > > -------------------------------------------------------------------------- ---- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.725 / Virus Database: 270.14.139/2619 - Release Date: 01/13/10 14:35:00 > > __________ > Visit and contribute to The JAWS Script Repository http://jawsscripts.com > > View the list's information and change your settings at > //www.freelists.org/list/jawsscripts > __________ Visit and contribute to The JAWS Script Repository http://jawsscripts.com View the list's information and change your settings at //www.freelists.org/list/jawsscripts