[jaws-uk] Re: Changing The Date and Time
- From: "mark.scrase" <mark.scrase@xxxxxxxxxxxxxx>
- To: <jaws-uk@xxxxxxxxxxxxx>
- Date: Mon, 29 Oct 2007 20:27:57 -0000
Hi Alex
Cracked it!
Thank you very much.
regards
Mark Scrase
----- Original Message -----
From: alex.thynne@xxxxxxxxxxxx
To: jaws-uk@xxxxxxxxxxxxx
Sent: Sunday, October 28, 2007 7:56 PM
Subject: [jaws-uk] Re: Changing The Date and Time
Hi Mark
ok, I'll give it a shot.
1 press windows key and go to the start menu.
2 go to control panel, if you have something in there that also starts
with the letter c press the c key until you hear control panel. Press enter on
control panel.
3 press d until you get to the date and time and press enter.
4 You will be in a combo box for month. It should say the current month
but you can be sure you get the correct month by opening the combo box with alt
plus down arrow, go down with your down arrow key until you hear October.
5 press the tab key and you should be on the year. If it says 2007, and
it should, press the tab key again twice until you are on the hour spin box.
If it says the current hour, tab again into the minute box. The next tab is
the seconds tab, you can change these if they are incorrect.
7 do control tab until you are in regional settings. This will probably
say GMT London
8 Hit tab again and you will be on the check box for automatic daylight
saving time. If this is not checked, press spacebar to check it.
9 Tab around until you see the apply button, after the cancel button,
press spacebar to apply your changes so far.
10 Do control tab again and you should now be on the internet time page.
11 Your machine should say synchronize with an Internet time server check
box. If it is not checked, press spacebar and check it.
12 Press tab and you will be on a choice of time servers. I don't do
anything with this one.
13 Press the tab key twice to ok, and you are done.
Alex
skype name: grytpype2006
windows live messenger name: alex.thynne
-----Original Message-----
From: jaws-uk-bounce@xxxxxxxxxxxxx [mailto:jaws-uk-bounce@xxxxxxxxxxxxx]On
Behalf Of mark.scrase
Sent: 28 October 2007 19:09
To: Jaws uk
Subject: [jaws-uk] Changing The Date and Time
Hi all
I must apologize, but I need someone to send a step by step guide on how I
can do this!
I'm completely useless as far as the I.T. goes!
I switch a compute on, and it usally works, if it doesn't work, it's broke!!!
Best wishes
Mark
- References:
- [jaws-uk] Re: Changing The Date and Time
- From: alex.thynne
Other related posts:
- » [jaws-uk] Changing The Date and Time
- » [jaws-uk] Re: Changing The Date and Time
- » [jaws-uk] Re: Changing The Date and Time
- [jaws-uk] Re: Changing The Date and Time
- From: alex.thynne