In article <1e7be2a553.Alan.Adams@xxxxxxxxxxxxxxxxxxxxxxx>, Alan Adams <alan@xxxxxxxxxxxxxxxx> wrote: > In message <0b21e1a553.alan@xxxxxxxxxxxx> Rev Dr Alan Leighton > <alan.leighton2@xxxxxxxxxxxx> wrote: > > Hi I purchased a Wireless key board and mouse which works on the > > Iyonix and the PC. It has a little gadget that plugs into a USB > > port. Is there anyway one can get one of these thingys for the > > USB port and have one in each computer so one can switch from > > one to another. Sorry if that sounds complicated , > > Cheers > > Alan Although not tested thoroughly I use... http://www.amazon.co.uk/USB-2-0-Manual-Switch-Peripherals/dp/B005LMX0IG/ref=sr_1_1?ie=UTF8&qid=1383671494&sr=8-1&keywords=USB+manual+switch to switch a keyboard and wireless mouse (connected to a USB hub) between a Beagleboard and Raspberry Pi. Although I haven't tried it on the Iyonix it would be worth trying one out for 9 UKP to see if it works. The switch requires three cables - USB, type A (the standard USB plug we are all familiar with) to USB, type B (commonly used on printers). Amazon also sell these very cheaply. Hint - the above assumes the common connection to your USB hub uses a USB, type B connector. All the best Richard --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support List-related queries to iyonix-support-moderators@xxxxxxxxxxxxx