On 27 Sep, Chris Evans <chris@xxxxxxxxxxxxxxx> wrote: > On Sat 25 Sep, David R Lane wrote: > > > > Hi comrades in ARMS! > > > > In another thread I was explaining a problem with Nixiyo, my > > Iyonix PC, when booting. I can now say more about the symptons. > > > > If I boot Nixiyo after a short time from shut down, it boots up > > normally. > > > > If I boot Nixiyo after a long time from previous use, it boots > > up, but with nothing on the screen, no text, no desktop, just a > > black screen. If I then get to the * prompt and type *NV , where > > NV is the name of an obey file in the root directory which > > produces a list of the pci devices, looking at the list later > > shows the normal list including the NVidia graphics card. > > > > Typing "*RMReinit NVidia RETURN RETURN" immediately after boot up > > usually produces nothing; but after leaving Nixiyo on for about 20 > > minutes, repeating this command several times gradually produces > > brighter "Input not supported" message and then a flash of the > > desktop. Each time the two images gradually get brighter until the > > first stays on the screen. After a few more repeats of the command, > > I get the desktop to stay and I can use Nixiyo as normal. > > > > I had the (original) PSU replaced with an HEC PSU 7 months ago, > > due to Nixiyo freezing on boot up, but not the 'black screen' > > problem. > > > > So is it the graphics card or the PSU again? > Sounds like the graphics card. > I don't recall ever finding/hearing a PSU change fixing this sort of > video output problem. > We can hire you a replacement graphics card and/or PSU to try for a couple > of weeks! > Chris Evans You could try re-seating the graphics card. I get similar symptoms from time to time and that always sorts it. -- David G Jones Parbold <>< Tel. +44 (0)1257 462949 jonesdg@xxxxxxxxxxxxx --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support