Hi Tom, I saw that test, but it´s pretty old, and as I remembered it, it was the test setup that was the limitation.... does anyone tried ISA Server with 10GB Adapters....? Thanks Jesper Hanno From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx] On Behalf Of Thomas W Shinder Sent: 26. november 2007 17:58 To: isapros@xxxxxxxxxxxxx Subject: [isapros] Re: ISA Server 2006 at Full Speed 10 Gb Hi Jesper, "wire speed" might be a problem. From numbers I've seen, the ISA Firewall tops out at about 1.5 Gbps. Of course, that could be a limitation of the testing enviroment, but I don't know what their besting environment was like, so I can't say. Tom Thomas W Shinder, M.D. Site: www.isaserver.org <http://www.isaserver.org/> Blog: http://blogs.isaserver.org/shinder/ Book: http://tinyurl.com/3xqb7 MVP -- Microsoft Firewalls (ISA) ________________________________ From: isapros-bounce@xxxxxxxxxxxxx [mailto:isapros-bounce@xxxxxxxxxxxxx] On Behalf Of Jesper Hanno Hansen Sent: Monday, November 26, 2007 10:44 AM To: isapros@xxxxxxxxxxxxx Subject: [isapros] ISA Server 2006 at Full Speed 10 Gb He Everyone, Does anyone have an idea for creating a ISA Server 2006 EE using 10Gb Adapters... My customer have the following requirements: - ISA Server 2006 EE (Array) - 3 x 10 Gb Interfaces Internal1, Internal2 and External (Would be upgraded to 40 and 100 Gb doing 2008!) - Must deliver "Wire Speed" - Route between Internal1 and Internal 2 <> External My Questions to this configuration: - What kind of Server could handle this setup? HP 580 ? - How many ISA Servers should we place in the Array (2, 4 or more?) - Number of CPU´s and kinds ? - where will the bottlenecks be ? (The PCI bus ???) Thanks Jesper Hanno