RE: nat
- From: "Kenneth Ta" <kent@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 17 Jan 2002 09:21:13 +0800
Gopi,
By default, ISA reject all packets after installation. To allow
SecureNAT, all that needs to be done is to create a Protocol Rule
allowing your list of protocols out to the Internet. This is required
for the ISA. For the client side, you have to either point your
intermediate router to ISA as its default gateway or point your
workstations to the ISA as their default gateway.
-----Original Message-----
From: Gopi tadi [mailto:gopi.tadi@xxxxxxxxxxxxxxx]
Sent: Thursday, January 17, 2002 12:43 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] nat
http://www.ISAserver.org
How to enable nat on isa server.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
kent@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
