you know how to enable client access to a remote VPN server? I try Tom's tutorial. it doesn't work. because the client need special software to access the VPN server. is the connection set up from the tutorial has the same functionality as the special client software? ----- Original Message ----- From: Julius Orayo To: [ISAserver.org Discussion List] Sent: Saturday, February 02, 2002 12:10 AM Subject: [isalist] RE: VPN access http://www.ISAserver.org Hi Michael, Can you use Tom Shinder's article available at: http://www.isaserver.org/shinder/tutorials/vpn_back_to_back_isa_server_environment.htm I used it and everything worked out fine. Best Wishes, Julius Orayo IT Manager, Medical Express Tanzania. -----Original Message----- From: Mike Anderson [mailto:manderson@xxxxxxxxxxxxxxxxxxx] Sent: Saturday, February 02, 2002 2:42 AM To: [ISAserver.org Discussion List] Subject: [isalist] VPN access http://www.ISAserver.org I am trying to set up an office to connect to my network through a VPN connection. I have everything set up with ISA and my firewall, but when I try to connect from their network, I get an error when the authentication comes up. I know the username and password/domain info is correct, what I am assuming is that their firewall is blocking the response from my firewall. If anyone knows what ports I need to tell them to open so that the connection can complete, I would appreciate the info. If it is in Tom's book, could you point me to the right chapter/page. I have looked but haven't found what I need yet. Thank you, Michael Anderson, MCSE Network Administrator Bonneville County ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jorayo@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: kevinyu@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')