Testing environment
- From: "mike" <mbailoux@xxxxxxxxxxxx>
- To: isalist@xxxxxxxxxxxxx
- Date: Wed, 30 Jan 2002 05:07:05 -0700
Hey
What is the best setup for testing ISA. If I have the external int
connected to my company LAN ie(207.204.5.0 & use router as gateway) and
have 1 client connected to the internal interface (192.168.0.0) the only
way that I can successfuly TS or VPN to the ISA over the internet is by
disabling the internal card. I also have a problem trying to browse the
internet from the internal client if RRAS is enabled. Could all these
conflicts be a cause of the external interface being connected to a
working domain.
We,re not sure how else to do it. Ultimitely we want the external int.
connected directly to the router, but I can't use this in the testing
environment or the LAN will be cut off from the Internet as well as remote
clients being cut off form the LAN.
We followed John's book to a "T" and could not figure why the above
mentioned did not work. It's only when I disconnected the internal card
that the TS and VPN worked. Now I think it's a test environment problem.
Could anyone please clarify
Thanks
Mike
Other related posts:
