It sounds as if you have your inbound web requests listener defined "per IP". If that's the case, then change it to "all IPs" and it should be more dynamic. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "Franklin T Vazquez" <ftv@xxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, February 13, 2002 12:57 Subject: [isalist] TZO and ISA Server http://www.ISAserver.org My ISA server have one NIC and a USB DSL Modem, wich work as a regular modem but with the advantage of DSL, I am using TZO Service to update my Domain Name with the Dynamic IP I receive from my ISP. My clients can browse the Internet with no problem, I secured my Exchange 2000 Server and works great too. The only problem I have is when publishing Web Sites. My web server is on the same ISA server, I changed the port to use other than 80 or 8080 and to point to my internal NIC as instructed by MS KnowledgeBase. The publishing works fine until I disconnect from DSL or my IP change. Then I have to do the publishing all over again to make it work. Is there any way to configure the Web Publishing so I dont have to do it every time I got disconnected from DSL or my IP Change? Thanks ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')