Jim, Thanks very much I am going to look now, and see if I can get it going properly. Regards Jason Richards -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: 09 January 2002 14:40 To: [ISAserver.org Discussion List] Subject: [isalist] Re: Routing & LAT Conflict http://www.ISAserver.org Try this: http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q288396 Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "Jason Richards" <administrator@xxxxxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, January 09, 2002 05:00 Subject: [isalist] Routing & LAT Conflict http://www.ISAserver.org I keep getting the following error message in the event log: The ISA Server services cannot create a packet filter 194.201.99.209. This event occurs when there is a conflict between the Local Address Table (LAT) configuration and the Windows 2000 routing table. Check the routing table and the LAT to find the source of the conflict. An example of my routes looks like: Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 212.200.99.222 212.200.99.209 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.16.0 255.255.255.0 192.168.16.2 192.168.16.2 1 192.168.16.2 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.16.255 255.255.255.255 192.168.16.2 192.168.16.2 1 212.200.99.0 255.255.255.0 212.200.99.209 212.200.99.209 1 212.200.99.209 255.255.255.255 127.0.0.1 127.0.0.1 1 212.200.99.255 255.255.255.255 212.200.99.209 212.200.99.209 1 224.0.0.0 224.0.0.0 192.168.16.2 192.168.16.2 1 224.0.0.0 224.0.0.0 212.200.99.209 212.200.99.209 1 255.255.255.255 255.255.255.255 212.200.99.209 212.200.99.209 1 Default Gateway: 194.201.99.222 I have the ISA LAT with just 192.168.16.0 - 255 Any ideas please Thanks Jason Richards ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: administrator@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')