Remote Administrator (RAdmin) and ISA
- From: "Frederic Giroux" <fgiroux@xxxxxxxxxxxxxx>
- To: <isalist@xxxxxxxxxxxxx>
- Date: Fri, 22 Aug 2003 11:36:17 -0400
Good day to all!
I am using Remote Administrator (better known as RAdmin) version 2.1
and I would like to use it through ISA. Despite all my tries, I have not even
been able to connect to a computer outside my LAN, never mind accessing a
server inside the LAN from the outside (at this point, if I could at least get
the client working).
The default port for RAdmin is 4899 but I'm using, for security
purposes, another port. As I write this, I realize I should have tried using
the standard port before writing this message but, at this time, I can not
change the port on the remote RAdmin so...
Here is what I tried to simply connect to a remote server (which, by
the way, is working fine since it is accessible if not using ISA):
- created a protocol definition for outbound access to the proper port
(no luck)
- created a protocol definition for outbound access to the proper port
and add secondary connections for inbound on all high ports
- same as before but also added secondary connections for outbound on
all high ports
Obviously, those changes were for testing purposes.
Still does not work!!! I am obviously missing something but what???
Anyone? Thanks!
Fred
______________________________
Frederic Giroux
LAN Administrator
CyberCap
fgiroux@xxxxxxxxxxxxxx
http://www.cybercap.qc.ca
33 Prince St.
Suite 301
Montreal, Qc
H3C 2M7
(514) 861-7700 ext. 303
Fax : (514) 861-7700
Other related posts:
