I think Stefaan meant, that you should point to 110.10.10.2 and not 192.168.50.3 from the Router, if you haven`t already done so. David Elmquist -----Original Message----- From: Lloyd@xxxxxxxxxxx [mailto:Lloyd@xxxxxxxxxxx] Sent: 27. maj 2002 00:24 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Publish a Syslog server to a border router http://www.ISAserver.org Hi Stefaan, thanks for responding. I may be a bit cloudy on your comment here. I will attempt to clarify. In the publishing rule that I have created there are two addresses that it ask for. 1) The external interface of the ISA server and 2) the Internal address of the computer (Syslog server). The public address I am using in my lab on the ISA is 110.10.10.2 and the Private LAN addressing scheme is 192.168.50.0./24 with the Syslog server located at 192.168.50.3. The only two choices I have for the ISA serve is the public interface 110.10.10.2/248 and the DMZ interface 110.20.20.1/240. If this is not correct please clear me up. thanks again, LA ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')