I am working on implementing ISA 2004 Server for this company who is currently using a WatchGuard V60. They have a DMZ network running and I have a few noob questions I would like to ask as I have not setup a DMZ before. 1. which order do I place the NICs under Networking Properties? 2. do I setup the DMZ NIC the same way I setup the LAN except put on a different subnet? I am a little confused at how their WatchGuard is operating. It operates as: Port Setup 0 (Private) 192.168.1.1 working 1 (Public) 67.69.15.18 working 2 (DMZ) 192.168.2.1 working 3 (DMZ2) 10.0.3.1 disconnected Which is pretty straight forward with the exception the routing table on the WatchGuard shows the following information: Routes Address Netmask Gateway Interface 67.69.15.19 255.255.255.255 0.0.0.0 eth0 67.69.15.16 255.255.255.248 0.0.0.0 eth1 1.0.0.0 255.255.255.0 0.0.0.0 eth5 2.0.0.0 255.255.255.0 0.0.0.0 eth4 192.168.2.0 255.255.255.0 0.0.0.0 eth2 192.168.1.0 255.255.255.0 0.0.0.0 eth0 10.0.3.0 255.255.255.0 0.0.0.0 eth3 0.0.0.0 0.0.0.0 67.69.15.17 eth1 I checked the wiring, and yes everything is wired to the 0, 1, and 2 way, however I don't understand why 67.69.15.19 points to eht0 which there is no public connection between the internet IP (LAN for the most part) and the public except for the firewall. Andrew