Whew, I get to breath for a minute. Did the RainConnect demo install. (2 hours.) Report coming. Then a client called. The lost power for 8 hours. I am there now trying to finish checking all workstations. (There were backups running at the time of the power outage and no UPS except on server.) This is the article I was looking for: http://www.isaserver.org/pages/article.asp?id=235 BTW, some one needs to go and update the site because the screen shots do not show up. John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: Tuesday, September 10, 2002 10:53 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Memory block (Mine) http://www.ISAserver.org Do you mean outbound or inbound? For outbound, a protocol rule allowing "all IP Protocols" should do the trick For Inbound, you'll need to create a protocol definition that includes "All IP Protocols" and use it in a server publishing rule. bear in mind that you'll only publish one host per external IP... Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/pages/author_index.asp?aut=3 http://isatools.org Read the books! ----- Original Message ----- From: "John Tolmachoff" <isalist@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Tuesday, September 10, 2002 10:17 AM Subject: [isalist] Memory block (Mine) http://www.ISAserver.org This is a multi-part message in MIME format. ------------------------------------------------------------------------ ---- ---- Setting up an ISA for a lab simulation. I can not remember how to configure it to open up wide to everything for LAN. I know Tom or Jim has written and article on ISAServer.org, but I can not find it right now, hence the subject line. :-( Any one remembers how or where the article is? John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com ------------------------------------------------------------------------ ---- ---- ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: isalist@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')