RE: MSN and H323. The adventure continues

  • From: "Steve Moffat" <steve@xxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Wed, 25 Sep 2002 18:36:03 +0100

I found that when initiating calls from outside of the ISA Gatekeeper, I
had to use the alias name or I got the same error as you
 
Steve

        -----Original Message-----
        From: William England [mailto:administrator@xxxxxxxxxxxxx] 
        Sent: 25 September 2002 17:49
        To: [ISAserver.org Discussion List]
        Subject: [isalist] RE: MSN and H323. The adventure continues
        
        
        http://www.ISAserver.org
        
        

        Yes works brilliantly on the LAN

         

        William

         

        -----Original Message-----
        From: Steve Moffat [mailto:steve@xxxxxxxxxxxxxxx] 
        Sent: 24 September 2002 20:55
        To: [ISAserver.org Discussion List]
        Subject: [isalist] RE: MSN and H323. The adventure continues

         

        http://www.ISAserver.org

        Does it work in your lan

         

        Steve

                -----Original Message-----
                From: William England
[mailto:administrator@xxxxxxxxxxxxx] 
                Sent: 24 September 2002 18:46
                To: [ISAserver.org Discussion List]
                Subject: [isalist] MSN and H323. The adventure continues

                http://www.ISAserver.org

                Well, hello to all once again.

                 

                I can now call people on the net from my internal
network. I just created a destination and ip rule.

                 

                Problem 1)I still cannot receive. The call comes in but
when I accept there is a delay and then a message on the external client
says that the internal client cannot receive calls. The internal client
is registered with the gatekeeper and shows under active terminals

                 

                Problem 2)If the external client on the net does not
have a fixed ip and subnet I cannot seem to create destination and rule
that works. If I don't create destination I am told that the person I am
calling is not registered with the gatekeeper. Ip address is 194.204.x.x
and the ISP subnet is 255.255.255.0 . Any ideas appreciated.

                 

                 

                William

                 

                PS I read the book, I say the help and I've seen the
site.....and I am still stuck......I followed to the letter guys....I
feel totally stupid

                ------------------------------------------------------
                List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
                ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
                ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
                ------------------------------------------------------
                Exchange Server Resource Site:
http://www.msexchange.org/
                Windows Security Resource Site:
http://www.windowsecurity.com/
                Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
                ------------------------------------------------------
                You are currently subscribed to this ISAserver.org
Discussion List as: steve@xxxxxxxxxxxxxxx
                To unsubscribe send a blank email to
$subst('Email.Unsub') 

        ------------------------------------------------------
        List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
        ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
        ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
        ------------------------------------------------------
        Exchange Server Resource Site: http://www.msexchange.org/
        Windows Security Resource Site: http://www.windowsecurity.com/
        Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
        ------------------------------------------------------
        You are currently subscribed to this ISAserver.org Discussion
List as: william400@xxxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub') 

        ------------------------------------------------------
        List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
        ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
        ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
        ------------------------------------------------------
        Exchange Server Resource Site: http://www.msexchange.org/
        Windows Security Resource Site: http://www.windowsecurity.com/
        Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
        ------------------------------------------------------
        You are currently subscribed to this ISAserver.org Discussion
List as: steve@xxxxxxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub') 

Other related posts: