RE: Issues relating to MS article Q292018
- From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Mon, 7 Apr 2003 19:51:54 -0500
Hi Reuben,
Why is this not an acceptable solution? This is the solution I recommend
and enforce at all sites.
Thanks!
Tom
Thomas W Shinder
www.isaserver.org/shinder
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp
-----Original Message-----
From: reuben.hecquet@xxxxxxxxxxxxxxxxxxxxxxxx
[mailto:reuben.hecquet@xxxxxxxxxxxxxxxxxxxxxxxx]
Sent: Monday, April 07, 2003 8:38 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Issues relating to MS article Q292018
http://www.ISAserver.org
We have problems as detailed in
http://support.microsoft.com/?kbid=292018.
The problem is fine if we allow external DNS resolution on the 1st ISA
but
this is not an acceptable resolution. The article mentions getting hold
of
a MS fix and that one should then have a W3proxy.exe version 3.0.1200.57
. However as I already have SP1 for ISA applied I have W3proxy version
3.0.1200.166.
Does anyone know whether the fix I mention is supposed to be included in
SP1 as the problem still seems to be there.
Does anyone have the MS fix or know where I can get it.
Free Trial Software: Monitor & Manage Web Use with SurfControl Web
Filter for MS ISA Server http://www.surfcontrol.com/go/zisadl1
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site: http://www.msexchange.org/
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
