ISA Server alert: A resource allocation failure has occurred.
- From: Gillian Cook <gcook@xxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 12 Feb 2002 16:59:09 -0500
Anyone gotten this ISA Alert before? This alert started recently after
installing SMTP Server through ISA.
Here's the alert...
-----------------------------------
The ISA Server services cannot create a packet filter (ex.) 111.111.111.11
(External IP address on ISA server). This event occurs when there is a
conflict between the Local Address Table (LAT) configuration and the Windows
2000 routing table. Check the routing table and the LAT to find the source
of the conflict.
------------------------
Gillian Cook
-----Original Message-----
From: Jay J. Mobley [mailto:jmobley@xxxxxxxxxx]
Sent: Tuesday, February 12, 2002 2:01 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Netlogon Port 445
http://www.ISAserver.org
"Netstat -na | more"
that will keep it from scrolling to where u can't see it
and the regkey, I would guess
HLKM-->System-->current control set-->servciese-->netlogon
but I just looked there and there doesn't seem to be any pertinent
settings
sorry =(
-Jay
-----Original Message-----
From: Lippman, Michael [mailto:Michael.Lippman@xxxxxxxxxxxxxxxx]
Sent: Tuesday, February 12, 2002 10:57 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Netlogon Port 445
http://www.ISAserver.org
It scrolls so fast on my screen I can't tell. I think you are
definitely pointing me in the right direction. Where do you think I
could change the port that Netlogon is listening. (Registry?)
MRL
-----Original Message-----
From: Jay J. Mobley [mailto:jmobley@xxxxxxxxxx]
Sent: Tuesday, February 12, 2002 1:41 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Netlogon Port 445
http://www.ISAserver.org
Yes.. I have an idea.
or rather a guess...
I think that your NETLOGON service on your ISA server must already be
listening on port 445 on all IP's for its self
(try a NETSTAT -na and look for something that says 0.0.0.0:445
LISTENING)
You prolly need to set that service to either not listen at all, or
listen on an alternate port, and then the publising rule will be able to
pick up that port and do what you want with it.
-Jay Mobley
-----Original Message-----
From: Michael Lippman [mailto:Michael.Lippman@xxxxxxxxxxxxxxxx]
Sent: Tuesday, February 12, 2002 10:08 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Netlogon Port 445
http://www.ISAserver.org
I am trying to setup a front end exchange server. I have all the custom
definitions completed except for Netlogon(TCP/445) Whenever I enable it
I
get a warning in the event log (14163) that the map failed because the
port on the external interface is being used by another application.
The
firewall service failed to bind etc. . . . .
Anyone have any ideas I would appreciate it.
Thanks,
MRL
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jmobley@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Michael.Lippman@xxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jmobley@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
gcook@xxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
