[isalist] Re: How to get rif of DHCP broadcast logging?Leo You could try to create the packet filter i`ve been going on about. Something like: Block packet transmission Custom: UDP - Direction - recieve local port: fixed - 68 remote port: fixed - 67 This ISA server`s external IP adress: 0.0.0.0 remote computer:192.168.255.1 Open the filter after creation and untick: Log any packets mathing this filter. David Elmquist 2002-01-06 00:00:15 192.168.255.1 255.255.255.255 Udp 68 67 BLOCKED 62.45.59.38 ----- Original Message ----- From: Leo To: [ISAserver.org Discussion List] Sent: Monday, January 07, 2002 2:56 PM Subject: [isalist] Re: How to get rif of DHCP broadcast logging? http://www.ISAserver.org There are a lot of protocols that broadcast. Neither of these protocols are visible in the ISA logs. It's only DHCP that's giving trouble. The LAT is also good configured...so it's even stranger because broadcast traffic is only mentioned for the local segment. The external adapter does not belong to that segment!! Changing the "DisableRogueDetection to 1" is not the solution because it's not a client orientated problem. The external adapter already has an address and the initial cause of the problem is a DHCP server problem or an ISA server problem. I'm wondering if there is anyone without this problem!? Greetings, Leo ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')