Re: How to configure to allow Ping and Trace route from clients behin d ISA Server
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 2 May 2002 12:15:04 -0700
1. the internal host must be a SecureNAT client
2. "Enable IP routing" must be selected in "IP Packet Filtering"
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: "Richard Davis" <rwdavis@xxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Thursday, May 02, 2002 10:36 AM
Subject: [isalist] How to configure to allow Ping and Trace route from
clients behin d ISA Server
http://www.ISAserver.org
Does anyone know how to configure the ISA server to allow clients to ping
and run trace route from behind the ISA server?
Richard W. Davis
Director MIS
Giles Enterprises, Inc.
Ph: 334-272-3528
Fax: 334-273-8168
www.gilesent.com
www.chesterfried.com
This E-mail and the material attached with it constitute privileged and
proprietary information. It is intended for the exclusive use of the person
indicated above. If you are not the intended recipient, you are hereby
notified that any disclosure, copying, distribution or the taking of any
action in reliance on the contents of this electronic information is
strictly prohibited. If you have received this in error, please notify us
by phone.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
