It was all done through wizards, so yah. I think I have it figured out now, so thanks. Jonathon J. Howey MENSE Inc. P 780.409.5620 F 780.409.5621 D 780.409.5628 C 780.965.8363 Jonathon@xxxxxxxx Defining the Future of Industry www.MENSE.ca <http://www.mense.ca/> ________________________________ From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Moffat Sent: July 25, 2006 2:37 PM To: ISA Mailing List Subject: [isalist] Re: FW: 0x80072740 on SBS / WPAD This being an SBS box, was it configured originally via the wizards?..... If not, then socket pooling may not have been configured correctly. S From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Jonathon J. Howey Sent: Tuesday, July 25, 2006 5:35 PM To: ISA Mailing List Subject: [isalist] FW: 0x80072740 on SBS / WPAD Last try ________________________________ From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Jonathon J. Howey Sent: July 17, 2006 10:23 AM To: isalist@xxxxxxxxxxxxx Subject: [isalist] 0x80072740 on SBS / WPAD -- Jim? Just found out i'm receiving alerts for error 0x80072740, "Web Proxy service failed to bind its socket". This is on a SBS machine, so IIS is installed. I've successfully applied the WPAD workaround from what I can tell, clients manage to find it. I've determined that whenever a WPAD request is made, i see this alert (shows as 'Resource allocation failure'). In my generated reports, I still only see IP addresses. When I go to Internal Network Properties -> Web proxy -> Enable HTTP is set to port 8080. Internal Properties -> Auto Discovery -> 'Publish automatic discovery information' is checked and on port 80. Help....? Thanks. Jonathon J. Howey MENSE Inc. P 780.409.5620 F 780.409.5621 D 780.409.5628 C 780.965.8363 Jonathon@xxxxxxxx Defining the Future of Industry www.MENSE.ca <http://www.mense.ca/>