Re: DNS Subnet question with DMZ
- From: "Thomas W. Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 10 Aug 2001 11:14:05 -0500
Hi Jay,
NO benefit from putting Exchange on the DMZ. But an SMTP server on the
DMZ, and have that SMTP server RELAY to a publish Exchange Server.
Publish the Exchange Server and make is available ONLY to the SMTP
server on the DMZ.
HTH,
Tom
www.isaserver.org/shinder
Thomas W Shinder, M.D., MCSE, MCT
-----Original Message-----
From: Jay [mailto:jschwarzkopf@xxxxxxxxxx]
Sent: Friday, August 10, 2001 9:18 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: DNS Subnet question with DMZ
http://www.ISAserver.org
Is there a benefit of putting E2k (or any server) on DMZ, over just
publishing it from internal net?
----- Original Message -----
From: Jim Harrison
To: [ISAserver.org Discussion List]
Sent: Friday, August 10, 2001 9:38 AM
Subject: [isalist] Re: DNS Subnet question with DMZ
http://www.ISAserver.org
Unfortunately, the best you can do for the DMZ server is a single IP
with the set you're given.
Since the DMZ in a three--homed ISA is a subnet of the external subnet,
you have to use a /30 mask for the DMZ, giving you only 2 usable IPs;
one for the ISA DMZ NIC and one left for a server.
Is the Exchange server an E2K variation? If so, placing it in the DMZ
is more trouble than it's worth, given the issues related to AD
membership across a firewall.
Jim Harrison
MCP(2K), A+, Network+, PCG
----- Original Message -----
From: cismic
To: [ISAserver.org Discussion List]
Sent: Thursday, August 09, 2001 9:51 PM
Subject: [isalist] DNS Subnet question with DMZ
http://www.ISAserver.org
I also posted this to the message boards. Sorry for the duplication.
Just thought I'd see if anyone was online tonight with some ideas.
J
Hello,
I'm using 10.0.0.1 for illustration:
I have 10.0.0.1/29 (8 IPs, 32 per C)
as my ip address. IP'S .1 and .8 are being used by my ISP. .7 is
assigned to my CISCO 776M ISDN router.
That leaves me with 5 ip address to use.
.2, .3, .4, .5, .6
EXT NIC 1. = .2
DMZ NIC 1. = .3
DMZ servers would be .4, .5, .6
If I split those into something like the following
.4 sql
.5 web
.6 DNS
I run out of address and won't be able to place my exchange server in
the dmz.
and Internal NIC private could be 10.0.1.0
Is there another method that will work just as well so I can publish my
Exchange server?
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jschwarzkopf@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
