RE: DISCONNECTING

  • From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Wed, 14 May 2003 20:27:42 -0500

Hi Angelo,

OK, make sure that one side is active and that they're configured to
stay connected. Check out the millions of articles on gateway to gateway
VPN configs over at www.isaserver.org/shinder

HTH,
Tom

Thomas W Shinder 
www.isaserver.org/shinder 
ISA Server and Beyond: http://tinyurl.com/1jq1 
Configuring ISA Server: http://tinyurl.com/1llp 



-----Original Message-----
From: Angelo A.. Colace [mailto:acolace@xxxxxxxxxxxxx] 
Sent: Wednesday, May 14, 2003 8:17 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] DISCONNECTING


http://www.ISAserver.org


I have a gateway to gateway VPN setup using a Cable modem to ISA server
which is connected to nic card (external) the other nic card (internal)
is connected to switch (hub)which the clients connect to at the branch
site to our main office using ISA server on both ends. the VPN
connections works great EXCEPT it disconnects in 2 minutes or less.
event logs an error of 11005 which i really do not see as relavent. 

also the branch sites ISA server acts as the dhcp for the clients.

Any ideas???

Angelo 
Hi Angelo,

Does the connection automatically redial?

Are both side "active"?

YES to BOTH






------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site: http://www.msexchange.org/
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: