AW: SNat clients throught routers
- From: "Christian Sommer" <christian@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sat, 11 Aug 2001 14:06:22 +0200
Hi,
you have to add a permanent route on your ISA Server, which points to your
other subnets, the gateway is your other Router.
eg. ISA is 192.168.0.1 and your other Router is 192.168.0.254 to your
192.168.1.x subnet.
route -P add 192.168.1.0 MASK 255.255.255.0 192.168.0.254
christian
-----Ursprüngliche Nachricht-----
Von: carloseduardo@xxxxxxxxxxxxxx [mailto:carloseduardo@xxxxxxxxxxxxxx]
Gesendet: Montag, 1. Januar 1601 01:00
An: [ISAserver.org Discussion List]
Betreff: [isalist] SNat clients throught routers
http://www.ISAserver.org
Hi,
I have some SNat clients in another domains accessing my
ISA Server through routers. I've set up the routers'
default gateway to point to my ISA. In my local domain
(also using Snat clients) everything runs OK, but in the
remote domains, the SNat clients are unable to access some
web sites. I thought that this problematic sites were using
different HTTP ports, but they don't. Everything else works
OK.
Any suggestions??
Carlos Eduardo
Technical Support - SEAD
eduardo@xxxxxxxxxxxxxx
carloseduardo@xxxxxxxxxxxxxx
_____________________________________________________
Esta mensagem foi enviada utilizando o WebMail SecrelNet!
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
christian@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
- » AW: SNat clients throught routers
