Rules.... create inbound rules and the outbound rules.... from the inbound rules you can assign a static IP to an inbound internat private ip address... -----Original Message----- From: Michael Klimkin [mailto:MStrider@xxxxxxx] Sent: Friday, May 24, 2002 12:10 PM To: [ISAserver.org Discussion List] Subject: [isalist] ADSL modem http://www.ISAserver.org Hello, Our proxy server is running Windows 2000 server with ISA Server standard edition. We use Alcatel Speed Touch home ADSL modem for internet connection. It's plugged in to the ISA server network interface through its Ethernet cable. VPN connection is established to the ADSL modem from ISA computer. Our Internet provider assigned us one public IP address that appears like WAN (PPP/SLIP) Interface after connection is established. We need more addresses. Our provider said that it has assigned 10 IP addresses for our line. We asked how we should configure our modem that our external users will be able to use these addresses. It's said that we should only configure our Windows 2000 server that hosts ISA server. We tried to ping that addresses from Internet but without success. Does anybody know how to configure our Server or modem such way that we will be able to use that external IP addresses for Server's publishing in the ISA server? We want the following scheme: one external address corresponds to one internal address. Thanks in advance, Michael ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: syed.muqeem@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')