[Ilugc] What should be the problem?

  • From: prasannatsmkumar@xxxxxxxxx (prasannatsmkumar)
  • Date: Tue, 20 Dec 2011 17:27:32 +0530

On Sun, Dec 18, 2011 at 12:27 AM, Arun Venkataswamy <arun289 at gmail.com>wrote:

On Sun, Dec 18, 2011 at 12:08 AM, Prasanna Venkadesh
<prasmailme at gmail.com>wrote:

According to his Data plan when some data limit is reached, the speed of
connection will drop from 3.1 Mbps to 256 kbps.

When the speed drops, he is unable to get internet connection in linux
and
he can access internet via windows in the same laptop using the Front-end
developed for the modem.

Now whats happening? What should be the problem? How can this be
resolved?


I am not sure if this is the case in your scenario, but seems logical to
put this forward:
The speed drop is not bandwidth control. It is actually because the
connection itself switches to a different technology (Broadband+ and High
speed 1x in my case). To switch the modem to connect using the lower speed
technology might be a proprietory AT command. Since the Windows front end
can do this for you, it is able to connect in low speed.

Regards,
Arun
_______________________________________________
ILUGC Mailing List:
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc



Try using wvdial with correct configuration. Usually the device name will
be /dev/ttyUSB0 (for a tata photon plus device I used). If it works then
make a script and run it as needed. It may be a problem of network manager.
If it works with wvdial then report the issue to network manager guys and
they will fix it.

If wvdial did not work:
Try with different plans available in the list (instead of the correct
one). This may work if your device switches to a different technology. Your
net connection may work. But it may cause some trouble like higher billing
rate so use it for some 4 hours and check the bill amount in net to make
sure you are not billed higher. If you are billed properly then yeah this
is the solution. But to my knowledge they won't change to a different
technology.

Other related posts: