Hi,
I have a PixelView Play TV Pro 2 (MV-4500) card installed in my comp.
I use Fedora Core 5. If i open TvTime I can see the last channel that i
viewed on windows. I couldn't change channels nor could i listen to any
sound. I did some googling to find out that my card is of the BT878 type.
The bttv drivers have been automatically loaded. but the parameters are
wrong. I need to change the values for "card" and "tuner". How do i do that?
The following is my dmesg output
$ dmesg | grep bttv
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 17, latency: 32, mmio:
0xee000000
bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=009fc0ff [init]
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0...
<6>via-rhine.c:v1.10-LK1.2.0-2.6June-10-2004 Written by Donald Becker
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
--
Asif
