[Ilugc] Specifying IP address range
- From: knura9@xxxxxxxxx (Arun Khan)
- Date: Thu Feb 25 10:33:27 2010
On Wed, Feb 24, 2010 at 10:14 PM, Ramesh Jothimani
<linuxrockers@xxxxxxxxx> wrote:
I want to create access control list for my network from 192.168.1.5 to
192.168.1.40 . Its given >in SQUID site only about creating ACL as a whole .
What do you mean by "as a whole"?
At best your OP was ambiguous and your follow up does not throw any
more light as to what is the purpose of this ACL that you want to
create.
You should describe in detail:
(a) what you want to achieve with the ACL
(b) what you have done so far in your setup (sharing your ACL with the
list is a good starting point)
(c) your test result with setup in (b)
IMO, only then members of this list will be able to help you. If you
cannot do the above three items. then I also conclude (like Mohan)
that you are looking for spoofed solution
This is a mailing list where people volunteer their time to help
others - not spoon feed. For spoon fed solutions please consider
professional help through consultants.
My two cents.
-- Arun Khan
Other related posts:
