I HAVE CREATED A VG OF 2GB AND 2 LV'S OF 500MB EACH..
THEN I CREATED A RAID 1 ARRAY (/dev/md0) FROM THE 2 LV'S (RADI ARRAY SIZE IS
NOW 1GB)
then i extended the size of the 2 LV's to 600MB..
now i want to REFRESH THE RAID ARRAY ....HOW CAN I DO IT SO THAT I GET THE
INCREASED ARRAY SIZE OF /DEV/MD0 ARRAY..???????
also , when i do
# fdisk -l , the output says
no valid partition table found on /dev/md0
From: skrhce2005@xxxxxxxxxxx
To: ilugc@xxxxxxxxxxxxx
Subject: RE: [Ilugc] March Month ILUGC Meet
Date: Tue, 4 Mar 2008 13:02:16 +0000
I HAVE CREATED A VG OF 2GB AND 2 LV'S OF 500MB EACH..
THEN I CREATED A RAID 1 ARRAY (/dev/md0) FROM THE 2 LV'S (RADI ARRAY SIZE IS
NOW 1GB)
then i extended the size of the 2 LV's to 600MB..
now i want to REFRESH THE RAID ARRAY ....HOW CAN I DO IT SO THAT I GET THE
INCREASED ARRAY SIZE OF /DEV/MD0 ARRAY..???????
also , when i do
# fdisk -l , the output says
no valid partition table found on /dev/md0
Date: Tue, 4 Mar 2008 12:40:00 +0530
From: sbharathi@xxxxxxxxxxxxx
To: ilugc@xxxxxxxxxxxxx
Subject: [Ilugc] March Month ILUGC Meet
ILUGC Meet :-
============
Due to Perl Training session on Sat 8th and Sun 9th, we don't
the separate ILUGC meet. If enough members are present during
the training then we can have a meet after session-1.
Bye :)
--
Bharathi S
_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
_________________________________________________________________
Post free property ads on Yello Classifieds now! www.yello.in
http://ss1.richmedia.in/recurl.asp?pid=221_______________________________________________
To unsubscribe, email ilugc-request@xxxxxxxxxxxxx with
"unsubscribe <password> <address>"
in the subject or body of the message.
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc