Hello All
I am using Mandriva ONE (kernal 2.6.22.9-desktop586-1mdv) in my P IV 2.4GZ,
512
RAM<file:///F:/Installing%20Huawei%20T1%20ETS2288%20modem%20in%20Mandriva%20One%20-%20LinuxQuestions_org.htm#>system.
Now I tried to connect my HUWAEI T1 ETS2288 wireless modem to my
system. I tried the directions given at
http://www.openpages.info/huawei.html and
http://www.linuxquestions.org/questions/linux-hardware-18/please-help-how-to-use-huawei-wll-modem-on-linux-452397/
Steps followed.
1. Created an executable script file "/etc/hotplug/usb/ti_usb_3410_5420"
with the given code.
2. Created link: "ln -s /dev/ttyUSB0 /dev/modem"
3. Made one rule file in /etc/udev/rules.d/026_ti_usb_3410.rules with the
code
#TI USB 3410
SUBSYSTEM=="usb_device" ACTION=="add"
SYSFS{idVendor}=="0451",SYSFS{idProduct}=="3410" \
SYSFS{bNumConfigurations}=="2" \
SYSFS{bConfigurationValue}=="1" \
RUN+="/bin/sh -c 'echo 2 > /sys%p/device/bConfigurationValue'"
4. Run command as follows;
[root@localhost denoj]# dmesg -c
usb 2-1: USB disconnect, address 6
ti_usb_3410_5052_1 ttyUSB0: TI USB 3410 1 port adapter converter now
disconnected from ttyUSB0
ti_usb_3410_5052 2-1:2.0: device disconnected
5. [root@localhost denoj]# dmesg -c
usb 2-1: new full speed USB device using uhci_hcd and address 7
usb 2-1: configuration #1 chosen from 1 choice
ti_usb_3410_5052 2-1:1.0: TI USB 3410 1 port adapter converter detected
usb 2-1: reset full speed USB device using uhci_hcd and address 7
usb 2-1: device
firmware<file:///F:/Installing%20Huawei%20T1%20ETS2288%20modem%20in%20Mandriva%20One%20-%20LinuxQuestions_org.htm#>changed
ti_usb_3410_5052: probe of 2-1:1.0 failed with error -5
usb 2-1: USB disconnect, address 7
usb 2-1: new full speed USB device using uhci_hcd and address 8
usb 2-1: configuration #1 chosen from 2 choices
ti_usb_3410_5052 2-1:1.0: TI USB 3410 1 port adapter converter detected
ti_usb_3410_5052: probe of 2-1:1.0 failed with error -5
ti_usb_3410_5052 2-1:2.0: TI USB 3410 1 port adapter converter detected
usb 2-1: TI USB 3410 1 port adapter converter now attached to ttyUSB0
[root@localhost denoj]#
6. Repeated the same command with plgging and unpluging the usb
cable<file:///F:/Installing%20Huawei%20T1%20ETS2288%20modem%20in%20Mandriva%20One%20-%20LinuxQuestions_org.htm#>many
times. But the result is same.
The device list in MCC shows a TIUSB boot device in Unkown Others tab
When i tried with kppp the modem querry didn't return any result.
Please somebody help me to solve this problem
--
????????
?????
"??????? ??????????? ???????? ????????"
