[Ilugc] Help on Conexant based USB ADSL modem in FC3!
- From: smohan@xxxxxxxx (S Mohan)
- Date: Tue Nov 23 11:32:52 2004
-----Original Message-----
From: ilugc-bounces@xxxxxxxxxxxxx
[mailto:ilugc-bounces@xxxxxxxxxxxxx] On Behalf Of T.KaruppuSwamy
Sent: Monday, November 22, 2004 6:58 PM
To: ilugc@xxxxxxxxxxxxx
Subject: [Ilugc] Help on Conexant based USB ADSL modem in FC3!
Dear Friends,
Now I have installled FC3, which is based on 2.6.x kernel.
There is no Olitec driver available for 2.6.x kernel. So I am
trying accessrunner driver (cxacru) which is available for
2.6.x kernel. Once ppp0 device created, after some time, I am
getting error of "LCP: timeout sending Config-Requests". I
googled on this and tried so many other options specified
there. But no positive signals. Can anybody help me on this?
Details:
-----------
OS: Fedora Core 3
Kernel: 2.6.9.X
Modem: Conexant USB ADSL Modem with VID & PID of 1 & 32 respectively.
ISP: Touchtel (Airtel) which uses PPPoA (ATM) with
encapsulation of LLC (llc-encaps in /etc/ppp/options)
Regards
T.KaruppuSwamy
Normally such problems occur due to MTU being higher than MTU along the
path. You could try clamping the MTU to PMTU using iptables
(clamp-mss-to-pmtu option). Alternatively, reduce the MTU of the outgoing
interface (suggest 1400) and establish connectivity using trial and error.
This can be done in the PPPoE config file too.
Warm regards
Mohan
Other related posts:
