[Ilugc] DKU-5 datacable problem with FC3
- From: cyborg4k@xxxxxxxxx (Shakthi Kannan)
- Date: Mon Jan 23 18:25:57 2006
Hi Gilbert Raja,
--- Gilbert Raja <gilbertraja@xxxxxxxxx> wrote:
Linux primary.carizen.com 2.6.12
Ok, you are using a 2.6 kernel. Good.
output for /sbin/lsmod
Module Size Used by
uhci_hcd 34192 0
You only have a UHCI host controller driver. You need
to have:
1. usbcore.ko support. Either its support is compiled
in in your kernel, or its not loaded. Try doing:
modprobe usbcore
2. usbserial.ko support. Either its support is
compiled in in your kernel or its not loaded.
modprobe usbserial
If support is not enabled, either built-in or as a
module, you need to recompile the kernel.
3. Drivers for your USB-to-serial cable.
Regards,
SK
--
Shakthi Kannan, MS
Software Engineer, Hexaware Technologies
[E]: cyborg4k@xxxxxxxxx [M]: (91) 98407-87007
[W]:
http://www.shakthimaan.com [L]: Chennai, India
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com ;
Other related posts: