Hi All Auto Silkscreen Feature : After trying out numerous times am posting this query to understand the logic in which Auto silkscreen utility works. Please provide some light on this utility if some body has done well on it Thanks & Regards Prakash S ----- Original Message ----- From: Hugh Allen To: icu-pcb-forum@xxxxxxxxxxxxx Sent: Friday, March 18, 2005 6:33 AM Subject: [PCB_FORUM] Re: latest .do files Hi Bob: If you want to just route all the U6 connections (to first non U6 pin in the schedule/order for each net) unsel all routing sel component U6 (type wire) route 25 pause OR if you want to route all entire nets from U6 unsel all routing sel component U6 (type net) route 25 pause Hope that is what you were looking for. Hugh Allen Specctra Specialist CopperCad Design Inc. www.coppercad.com hugh@xxxxxxxxxxxxx -----Original Message----- From: Robert S. Wilson [mailto:rsw@xxxxxxxxxxx] Sent: Thursday, March 17, 2005 4:09 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] latest .do files Hi, It has been a good while since I've used my closely-held and never-discarded .do files. (I knew they might come in handy). Plus a friend pointed me to some. In all the ones I've kept, I don't have one that routes by component. I'd like to route a BGA and stop and look at the results. Would anyone mind pointing me in a direction? Thanks a bunch. Bob (BTW, coming from PADS 5.0.1 to Allegro 15.2 is a real eye-opener. It looks like a heck of a tool.) ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- ----------------------------------------------------------- To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx with a subject of subscribe or unsubscribe To view the archives of this list please login at //www.freelists.org. Our list name is icu-pcb-forum or go to //www.freelists.org/archives/icu-pcb-forum/ Problems or Questions: Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum. SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx POST: icu-jobs-forum@xxxxxxxxxx ----------------------------------------------------------- -- This message contains information from GDA Technologies LTD and affiliates, and is intended for the sole use of the individual and entity to whom it is addressed. It may contain information, including any attachments, that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended addressee, nor authorized to receive for the intended addressee, you are hereby notified that you may not use, copy, disclose or distribute to anyone the message or any information contained in the message. If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments. This message was scanned for spam and viruses by BitDefender.
No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.7.3 - Release Date: 3/15/2005
-- This message contains information from GDA Technologies LTD and affiliates, and is intended for the sole use of the individual and entity to whom it is addressed. It may contain information, including any attachments, that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended addressee, nor authorized to receive for the intended addressee, you are hereby notified that you may not use, copy, disclose or distribute to anyone the message or any information contained in the message. If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments. This message was scanned for spam and viruses by BitDefender.