[PCB_FORUM] Re: dynamic shape update seems slow
- From: "Jean Bratton" <jean.bratton@xxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 5 Jul 2005 16:53:05 -0700
Or, you can go to Setup > Drawing Options and at the bottom of the form
are the same options.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Eric Hufstedler
Sent: Tuesday, July 05, 2005 7:39 PM
To: 'icu-pcb-forum@xxxxxxxxxxxxx'
Subject: [PCB_FORUM] Re: dynamic shape update seems slow
Thanks George. I was even on that page and didn't see the disable
button.
That does the trick.
Eric
> -----Original Message-----
> From: george.h.patrick@xxxxxxxxxxxxxx
> Go to Shapes > Global Dynamic Params > Shape Fill and click
> the "Disabled"
> button to totally disable the updates, or click "Rough" to
> speed things up
> some. You will have to click "Smooth" to update them before you run
> gerbers.
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Eric
> I have a couple dynamic shapes (basically entire power
> planes) that seem to
> take a long time to update when I add a via, for example.
>
> I'm pretty sure I didn't have this in 15.0 (I'm on 15.2 now,
> skipped over
> 15.1).
>
> I looked for ways to defer dynamic updating, but couldn't find any.
>
> In the mean time, I'll move the shapes over, but is there
> another solution?
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
