Yes, indeed ,I missed set up: that's why I had problem. But now it works great! Thank you all! Regards, OLEG KIPNIS x8286 PCB Layout Designer SMART Modular Technologies, Inc. 4211 Starboard Drive Fremont, CA 94538 Direct: 510-624-8286 Fax: 510-624-8195 -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Gary MacIndoe Sent: Thursday, May 12, 2005 2:35 PM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: Shape on Allegro 15 Oleg, With the new "dynamic shapes" in 15.x, they "heal themselves" whenever they need to: a via is moved, a trace is routed through it, a pin is moved or added within the shape etc. Just make sure the shape is "dynamic" and not "static", and that the dynamic shape fill is set to "Smooth" (click Setup -> Drawing Options..., Status tab). Gary E. MacIndoe PCB Design Engineer Advanced Micro Devices, Inc. Longmont, Colorado -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Kipnis, Oleg Sent: Thursday, May 12, 2005 12:08 PM To: 'icu-pcb-forum@xxxxxxxxxxxxx' Subject: [PCB_FORUM] Shape on Allegro 15 Hello Allegro 15 Gurus, On allegro 14 was good option to fix shape after moving vias: "Edit-Shape-Void-Auto" and you fixing all voids at once. How you are fixing on Allegro 15 (since new shape format) unless to fix one void at the time (delete void and put new one). Thank you in advance. Regards, OLEG KIPNIS x8286 PCB Layout Designer SMART Modular Technologies, Inc. 4211 Starboard Drive Fremont, CA 94538 Direct: 510-624-8286 Fax: 510-624-8195