[PCB_FORUM] Re: RoHS Logo
- From: "Vince Di Lello" <vince.dilello@xxxxxxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Fri, 13 May 2005 10:36:16 -0700
Thanks George ... that is exactly what I am looking for.
Vincent Di Lello, CID+
Senior CAD Designer
Kaleidescape Canada, Inc.
vdilello@xxxxxxxxxxxxxxxx
(v) 519.772.6418
(f) 519.772.6401
(c) 519.835.4477
www.kaleidescape.com
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
george.h.patrick@xxxxxxxxxxxxxx
Sent: Friday, May 13, 2005 1:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: RoHS Logo
Refer to: http://www.ipc.org/TOC/IPC-1066.pdf
<http://www.ipc.org/TOC/IPC-1066.pdf>
--
George Patrick
Tektronix, Inc.
Central Engineering, PCB Design Group
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
Phone: 503-627-5272 Fax: 503-627-5587
http://www.tektronix.com <http://www.tektronix.com/>
http://www.pcb-designer.com <http://www.pcb-designer.com/>
It's my opinion, not Tektronix'
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Vince Di Lello
Sent: Friday, May 13, 2005 09:50
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] RoHS Logo
Good afternoon fellow designers ..... just wondering if anyone
has (or has come across) any RoHS Compliant logos that they are putting
on the silkscreen of their boards. Thanks in advance for your help.
Vincent Di Lello, CID+
Senior CAD Designer
Kaleidescape Canada, Inc.
vdilello@xxxxxxxxxxxxxxxx
(v) 519.772.6418
(f) 519.772.6401
www.kaleidescape.com
Other related posts:
